CMF_ndxxx
» CMF Member
just wanted to see if anyone was replacing ecus or just rechipping after exhaust and cai. has anyone used nistune?
ecu for na
- Thread starter CMF_ndxxx
- Start date
mik
» CMF MemberIMPUL does a NA ecu as far as i know.
CMF_Mickb
» CMF Membernistune would do the trick if you could get the right ecu.
Only 2nd gen micra ecu's can accept the current daughterboard from what i remember.. ie the Micra's after ours.
Only 2nd gen micra ecu's can accept the current daughterboard from what i remember.. ie the Micra's after ours.
CMF_ndxxx
» CMF Memberahhh right. so can i reflash my current oem computer?
mik
» CMF Memberthere is pete from the UK which actually had done that by himself, but don't know that acutally worked.
CMF_sensei369
» CMF MemberHi Would recomend impul Ecu its almost plug and play. you can look at it here
http://www.japanparts.com/db/parts_...AR=87&MIDDLE=&SMALL=&MAKER=40&VOLKEY=&SEARCH_
DEALER=5&SEARCH_CAR=87&SEARCH_MIDDLE=&SEARCH_SMALL=&SEARCH_
MAKER=&SEARCH_VOLKEY=&SEARCH_page=1&submit.x=61&submit.y=7
or
http://www.japanparts.com/db/partslist.php?dealer=5&car=87&middlesmall=&maker=&volkey=&page=1
Look under ECU.
only draw back is loss of your fuel economy otherwise its great. you will need good plug leds and plugs too.
http://www.japanparts.com/db/parts_...AR=87&MIDDLE=&SMALL=&MAKER=40&VOLKEY=&SEARCH_
DEALER=5&SEARCH_CAR=87&SEARCH_MIDDLE=&SEARCH_SMALL=&SEARCH_
MAKER=&SEARCH_VOLKEY=&SEARCH_page=1&submit.x=61&submit.y=7
or
http://www.japanparts.com/db/partslist.php?dealer=5&car=87&middlesmall=&maker=&volkey=&page=1
Look under ECU.
only draw back is loss of your fuel economy otherwise its great. you will need good plug leds and plugs too.
