CMF_cmy.k11
» CMF Member
hey, just bought my k11 with a blown motor. put in an import 1.3l engine(black rocker cover).any suggestions for a 1st engine mod for increase in power?
1st mod
- Thread starter CMF_cmy.k11
- Start date
CMF_mipcar
» CMF MemberAny ideas how much you want to spend? Cost is a good starting point.
Generally speaking extractors will give you the most noticeable gain on an otherwise stock motor.
Mychael
Generally speaking extractors will give you the most noticeable gain on an otherwise stock motor.
Mychael
smidge
» CMF Memberair filter makes it sound cooler even if performance gains are minimal
keep in mind you can be defected for it
where'd you pick up the import motor from?
keep in mind you can be defected for it
where'd you pick up the import motor from?
CMF_ed.
» CMF MemberFull exhaust 
CMF_cmy.k11
» CMF Memberpicked up the motor from a place called jap import spares in smithfield,sydney
CMF_cmy.k11
» CMF Memberill propably put an air filter, and extractors full exhaust. i have been reading the posts and seen a couple of the members have gone turbo. is it safe to run a small setup on 7 psi like some of the examples ive seen?
smidge
» CMF Memberyep, its possible, but it WILL cost a few grand unless you can do every single bit yourself
i'm trying to keep my converison under $2grand but will see how i go
its quite an enjoyable project if you're doing it yourself, if you just want a turbo car go buy one it will be much simpler
i'm trying to keep my converison under $2grand but will see how i go
its quite an enjoyable project if you're doing it yourself, if you just want a turbo car go buy one it will be much simpler
CMF_fred
» CMF Memberthink about getting a GA15 throttle body...... and a adjustable fuel regulator..... to go with the extractors, make it all breathe properly
