Search results

So seeing that I had no interest in the rolling shell I have decided to part out the old K11 micra. n15 brakes with new ball joints/wheel bearings = $150 ono Rear axel disc brake setup (super S no abs) = $250 ono Rear axel with 4 degrees neg camber (drum brakes) = $90 Front and rear WALD...

I have made another thread for offers for the remaining parts left from my Micra. I'm open for offers so let me know, via a post on here or PM. Parts with pics to be posted shortly.

So I have the attention span of a fish and it only takes me a couple of months after completing a project before I get another hair brained idea for a new project. That being said I require funds to pay for the new project. I have list of parts below. PM me if your keen on any of the part and...

I have a full exhaust system, 4-2-1 extractors (non AC), resonator, cat and muffler with 2 inch press bend in mild steel. It will require flanges to be welded onto the system to install or re welded, as somehow the system was installed completely welded in one piece. Some surface rust on the...

I have a set of aftermarket seat (black) with seat rails straight bolt in. Drivers seat has a small cigarette burn on it. Either way heaps better than the stock ones. I need a set of stock seat to pass a blue slip on my other micra, both micra have after market seat so need to swap one set...

Trying to get a blue slip for the turbo micra and the easiest way will be to change it back to stock till it gets passed. So I need a stock exhaust including everything from manifold to the muffler. If anyone has a one laying around that they can sell me or even lend to me for a week or so...

I need to sets of front seat belt clips. The ones that bolt to the seats. The ones I have on my seat are too skinny I think there from a 96 or later and the 95 seat belts wont click in as they are too wide. Let me know if someone has a set they are willing to part with. Thanks.

Check out the previous pages of this turbo build. Page 1 = https://micra.org.uk/cmf/message/82211 Page 2 = https://micra.org.uk/cmf/message/83002 Page 3 = https://micra.org.uk/cmf/message/84702 Page 4 = https://micra.org.uk/cmf/message/85469

Don't sweat it out in your micra this summer Just removed the aircon from my micra included condenser & fan, compressor with mounting bracket, wiring, cabin unit and blower, refrigerant hoses. Just needs a switch to turn it on, a relay to wire it up and gas to get it to work. If any ones...

I have a custom intake manifold which I believe was made by frank, intended on using it on my turbo conversion but wanted a bigger TB and ended up making my own. The intake comes with a cg16 TB which is slightly bigger than stock one. Also have a black top JDM cam cover which considerably...

Sort of trying to figure out how this will be set up for a turbo setup. I believe the PCV is a one way valve (correct me if I'm wrong) so shouldn't be effected by the boost but it wont be releasing crankcase pressure if plumbed to the intake manifold. I was thinking the breather can either go...

Previous threads - page 1 = https://micra.org.uk/cmf/message/82211 Page 2 = https://micra.org.uk/cmf/message/83002 Page 3 = https://micra.org.uk/cmf/message/84702 Hopefully this will be the last page to completion.

Previous threads - page 1 = https://micra.org.uk/cmf/message/82211 Page 2 = https://micra.org.uk/cmf/message/83002 Thread getting a bit long new page.

Are these tension bolts like the head bolts? Anyone know what torque they should be tightened too? I followed the Haynes torque spec while checking the clearances but it seem like these should be tighter. Any input would be appreciated.

I need an alternator bracket, as much as I would like to keep the AC in the car I think I'm going to delete it. So if any one has a alternator only bracket they can sell me then hit me up with a PM. Thanks.

I had the rear axel altered with -3.5 degrees camber but swapped it out for a Super S disc brake setup. So just wondering if anyone is interested in it. The axel has been resprayed in black, not to sure of the state of the rear bearings, the drums still have a bit of meat on them. If your...

Thread was getting a bit long so created page 2 and the Turbo build continues........ Been a bit slack over the past couple of weeks but finally got the paint done, must say not really a fun job a lot of work to do it right (or try to do it right). I removed all panels, hatch and doors...

Hey guys if anyone has a rear spoiler sitting around that you want to get rid of let me know. Looking for the super s type but I'm open for other spoilers. PM me.

Well took the head off the 265,000 klm engine and realised why you should flush the radiator and not use water instead of coolant. See picture 2 to 3 mm corrosion in the head making it pretty much useless. So I need a new head. no cams, valve, etc needed. If anyone has a head in good...

So I'm currently in the process of building a 1995 Micra SLX Unlike some of the cashed up builds you have seen in the past on this forum, I'm trying to build a turbo'd Micra on somewhat of a budget with a lot of the parts supplied by member on this forum. When I decided to build this car I...