What wheels fit thread

[Rob]

Need some wheels for the micra. See loads of you fitting random wheels.

Thought it would be good to have a little list of wheels people have found that fit straight on or with small mods.

 

[karlj]

I think there's already a list somewhere, but I'll kick start this one

Anything 4x100
Vauxhall
VW
Mazda
Toyota
BMW (mini included)

All will need the centre bore enlarging

4x101.6 will fit with wobble bolts

Mini
Austin

Most will be buying aftermarket wheels so the centre bore wont be a problem

Edit

Between 13 and 17 inch diameter is the norm with anything from 5 to 9 inch wide

What size you go for depends on which K you have

 

[Rob]

Micra center bore is 56.1 ain't it?

 

[karlj]

59.1

 

[hoopdub]

Lots and lots of options. Just depends how much you want to spend. You will need to take offset into consideration and fixing hole depth/width. Renault wheels will go straight on because their CB is 60.1 half a milimeter gap around the spigot so you need to seat the nuts correctly or you will get wobble. Spigot rings are not available off the shelf for this size. Also with some wheels you will need narrower wheel nuts to fit in the hole if they are counter sunk into the wheel. And some wheels have a vey deep center, on a micra that means fitting longer studs. A lot more hasstle than longer wheel bolts for other makes. If your feeling flush you can fit wheels with other pcd's it just means you will need to get adaptors made.

 

[r-reg-sr]

seems like the wide gripper look is getting bids in.

 

[Rob]

I need something wider... def dont have a lot of grip from the skinny 14"s when the boost kicks in

 

[hoopdub]

check out Robbs 13s for sale in the for sale section, cheap set of wheels!!!

 

[Sterling]

Be different, fit some steel wheels and cheapo poundland wheel trims.

 

[k11TZZ]

id go for the ones ive seen in the market, with spinners.