Rear Axle movement

[CMF_danno88]

Hey guys

to cut a long story short, i kinda need to bring my rear axle forward by about 10-15mm. after lowering it (not a crazy amount) the rear tyres scrape the rear bar over some bumps.

my thoughts are that i need to shorten the trailing arms on either side to do this, or maybe replace the bushes with nolathane (ive noticed that 1 on either side is eccentric).

let me know your thoughts...

dan

 

[CMF_asdame]

after lowering by 35mm and installed a janspeed system, i fitted some whiteline adjustable lower trailing arms and panhard rod to centralise and move the axle forward abit cos it was hitting the long janspeed backbox during big bumps

 

[CMF_danno88]

yeh i have a whiteline panhard rod. ive looked on the whiteline website wor adjustable trailing arms but they dont seem to list them. anyone know if they r still availible?

 

[CMF_kovert.k11]

whiteline trailing arms have been discontinued.. Mat Humphris can produce them

 

[CMF_danno88]

who is matt humphris and how do i contact him?

 

[CMF_kovert.k11]

mailto:[email protected]