Problems with ICE!

Status
Not open for further replies.

curtis

Ex. Club Member
Ok i have always been able to sort ICE problems out, but ahhhh this one is a pest!

Ok New headunit in, working fine.
Phonos in to cd player and into amp, all correct channels
Remote is correct
Power and grounds are correct and AMP POWERS UP FINE!
6x9s into amp in correct channels
6x9s tested on the 60w output from cd player and work fine!

NO sound from 6x9s

Have tryed.....another amp, different phono cables and a different cd player

Any help would be good!

Thanks Curtis.
 
have you tried a different set of speakers through the amp?

also, have you tested the cables are all ok? Continuity test?
 
You've tried more than one amp?

Then it sounds like your RCA's to me. Have you actually enabled the pre-out on the headunit?
 
Curtis, bit off topic m8, did they send u a cable with urs cause they didnt with mine and i just phoned inphase and they said i should have one and to phone car audio centre tomorrow :(
 
Moddedmicra: Mine came with bits missing as well, also the screen has screwed up! i gotta drive to birmingham to sort it out!
 
Status
Not open for further replies.
Back
Top