Hi all, I'm putting a CG13 in my mini, and I'm having a bit of an issue getting it to start. The engine is from a 1999 micra, with NATS 5? I think, with 7 wires. I've had the engine running before, but since then I pulled it out to tidy everything up, before putting it back in. Fuel is circulating through the rail, there's spark, and its cranking nicely. the plugs are dry, so I'm assuming the ECU isn't firing the injectors. I've been following the NATS issue troubleshooter guide in the workshop manual, and I think I may have found the issue, with the ignition on, I get about 7V between the NATS signal wire and ground, where the manual says there should be nothing, I've chased the wire through, and the issue seems to only be present when the ECU is present, which to me implies the ECU is acting oddly.
If anyone has any ideas on what might be causing this, or what might fix it, I'd really appreciate the help!!
Thanks,
Tom
If anyone has any ideas on what might be causing this, or what might fix it, I'd really appreciate the help!!
Thanks,
Tom