K1O PISTONS

[TECHNICALT]

I am unable to find reasonably priced pistons for a 1.2 Micra engine, yet E Bay ETC. is saturated with pistons for many other Jap engines of the same era,and even cheaper on USA sites. + sensible prices.
40 Thou . oversize would be fine , I would even consider good used pistons,

 

[frank]

rocking horse poo aint they http://www.micra.org.uk/threads/new-ma12-oversize-pistons.42127/#post-453364
CG pistons and rods may be an option maybe ?

 

[TECHNICALT]

Even had a peek at the Chinese sites Ali Express Ali Babba ETC.What is frustrating is that I see some Grassers still have a source , but very costly .So some one is still manufacturing them. Also noted that the K10 is very popular ln Canada, so thats my next search place.

 

[frank]

the 71mm CG compression height is about 28mm, and the 72mm CGA3 about 1mm less, and the corsa xe 72.5 ones are about 25mm.
the CG rods run the same size b/e shells as your MA, and are about 122 and 130mm centre to centre

 

[Noddie]

the 71mm CG compression height is about 28mm, and the 72mm CGA3 about 1mm less, and the corsa xe 72.5 ones are about 25mm.
the CG rods run the same size b/e shells as your MA, and are about 122 and 130mm centre to centre

Do you have a book of numbers frank?