K11 Front wing removal

[CMF_micrafun2]

Is it bolted only?

Just a few nuts/bolts holding the top part of the wing

If anybody has pics or drawing - would really help

micrafun

 

[CMF_Micra_King]

Never done it but I think its like this.

 

[mik]

there are two on the bottom side, where micra_king has written "bolt?"

also one bolt in the front, under the plastic, which is bolted from the frontbumper up to the wing.

cheers

 

[CMF_micrafun2]

Thank you Micra King.
Thank you mik.

 

[CMF_micrafun2]

Are the drawings available from a PDF manual on the web.
It would be a real asset to have to be able to look up a manual

Micrafun

 

[CMF_frank2]

micrafun2 WROTE:

"Are the drawings available from a PDF manual on the web.

It would be a real asset to have to be able to look up a manual

Micrafun

how is your polish ?
http://rapidshare.com/files/96563963/Nissan_Micra_K11.pdf

frank

 

[CMF_micrafun2]

Thanks frank2.
Haha - you are havin a larf!!
I have seen this link just day before posting my original question here.
Thought someone would point me to this link. haha.
PDF cant be saved unfortunately.
I cant read it.
But the drawings are good.
There must be an English version somewhere

 

[CMF_Micra_King]

http://nissan4u.com/parts/micra/er_k11e/1997_8/type_10/
Handy for looking up parts and so on. There are no other service manuals online unfortunately that are in English.

 

[CMF_micrafun2]

Thanks Micra_King
Looks useful.
Though I cant see the drawing for frong wing removal.
Thanks again for posting the diagram above.

 

[CMF_nz_aj]

Also where it says "bolt?", all the JDM K11 I've taken apart have had front plastic mud flap of sorts that had to be unbolted first.
I've always found a lot of mud between this part of the front wing & the sill behind. A likely rust trap if the paint were at all damaged.