CMF_micrafun2
» CMF MemberIts time to change the clutch on the 1.0L Micra K11 1998. Gather that there are three engine+transmission mounts to consider.
Q1: Which are the mounts to remove completely and which one to loosen up and keep nut/bolts still in place
Q2: Once the gearbox housing is pryed apart, will the bell housing just move apart or will there be a further amount of force necessary if the throw up bearing is holding any parts
Q3: Has any body got drawings or web links for the trasmission cable linkages - and how to unlink - also drawings of the mounts.
Q4: On re-assembly - Is it recommended to use medium thread lock - blue - on new pressure plate bolts?
Thanks
Danny
Q1: Which are the mounts to remove completely and which one to loosen up and keep nut/bolts still in place
Q2: Once the gearbox housing is pryed apart, will the bell housing just move apart or will there be a further amount of force necessary if the throw up bearing is holding any parts
Q3: Has any body got drawings or web links for the trasmission cable linkages - and how to unlink - also drawings of the mounts.
Q4: On re-assembly - Is it recommended to use medium thread lock - blue - on new pressure plate bolts?
Thanks
Danny