intro...

[CMF_Doom]

frank2 WROTE:

"ndxxx WROTE:<BR><BR>"2mm"</DIV><BR><BR>just right for 1 bar eh ndxxx

How much would this lower the compression? (The standard gasket is 1mm isnt it?)

 

[CMF_ndxxx]

im not sure... i think it would lowe to about 10.... not 100%

 

[CMF_frank2]

my guess would be 8.5:1
there are some online calculators eh, iirc the stock combustion chamber is about 37cc (with gasket and piston dish) and 1mm of blockskim (or extra 1mm h/g) is 4cc

 

[CMF_ndxxx]

Ahhhh sweet frank! Yeah I weren't to sure of the figures haha

 

[CMF_ndxxx]

ANOTHER ADDITION! a t28bb will be picked up tommorow for extra HP's hehehe

 

[CMF_ndxxx]

made progress last night, had to grin the bolts of the manifold last night because they were ****ed, while i was at it the inlet/outlets of the manifold had huge hollows in them so to prevent leaks and what not i skimmed them back and now there flat as **** and look ****ing brilliant. off to get some washers today and new nuts so i can put the t28 on and hook the oil lines and dump pipe up

<a href="http://tinypic.com?ref=qz3wps" target="_blank"><img src="http://i56.tinypic.com/qz3wps.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=11919nt" target="_blank"><img src="http://i53.tinypic.com/11919nt.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

 

[CMF_ndxxx]

hey guys and gals, got new exhaust/manifold bolts and seals for the oil feed and return today so they went on with the bottome of the speed flow fittings. heres how she stands at the moments would love feedback guys thanks hehehe

<a href="http://tinypic.com?ref=5yrzn6" target="_blank"><img src="http://i53.tinypic.com/5yrzn6.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=2ce2r01" target="_blank"><img src="http://i55.tinypic.com/2ce2r01.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=2zxvwp2" target="_blank"><img src="http://i56.tinypic.com/2zxvwp2.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=2j2vr00" target="_blank"><img src="http://i54.tinypic.com/2j2vr00.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

 

[CMF_ndxxx]

so lately everything as been going perfect until coming home late last night when a ****ing giant wallaby deciced to jump out last minute and take on the micra, the stupid ****ing little c%&t!!!!! so far apart from visual damage i dont know what else is wrong with it but will find out today, i cant beleive this..... i actuallly cried. oh well more money to spend on it i guess. ahaha

<a href="http://tinypic.com?ref=24g8sna" target="_blank"><img src="http://i51.tinypic.com/24g8sna.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=jktvki" target="_blank"><img src="http://i51.tinypic.com/jktvki.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

 

[CMF_RBLUV]

(

 

[CMF_hotfunk67]

that sucks.

 

[CMF_Greo]

Time for Nismo front bar?

I had a simliar thing with a duck flying into my wing mirror that i'd recently repainted black. Had to respray it. Not as bad as a suicidal wallaby though.

 

[CMF_ndxxx]

it had a nismo front lip on it... ****ing off it , not even close to repairable!!! the lip off the front ended up in half from the ****ing wallaby. oh well

 

[CMF_ndxxx]

link buddy?

 

[CMF_jcmicra]

ahhh! badluck! :'( hopefully you dont find any extra damage...buy a big fat front bar so you can fit a bit fat front mount turbo looks mint! not too much longer from the parts you have ay

 

[CMF_ndxxx]

Nah jc not long at all bro, just have to get a few speedflow fittings and just little bits and peices, just waiting on my mate to lend me his mr2 so I can pull mine off the road aye

 

[CMF_mycra]

mate....that's painfull. guess my luck's starting to run out. drove to Sydney 3 times, Canberra and along the coast to QLD, havent copped it yet lol S.A in few months fingers crossed !!!

 

[CMF_ndxxx]

sounds like your doing better then me mate hahaha

 

[CMF_RBLUV]

whats the damage ndxxx, looks like just bar/lip/guard? anything behind pushed in?

 

[CMF_ndxxx]

so far what ive manage to get is front bar, front lip, the plastic inner guard, lower control arm is bent, left front foglight has something wrong with it but i didnt check it out too much, but thats just by eye.... who knows what else, anyway. good news. organised another front bar. i dont know how many times kovert has helped me out but again i owe him another thank you.... waiting on a price for postage and a front bumper will be coming but thats all ill mention at the moment hehehe

 

[CMF_ndxxx]

hey guys... finally had 10 minutes so go and grab some anti seaze!!!!!! some pics with the mani and dump bolted up to the turbo DDD enjoy the sexy pics hahaha

<a href="http://tinypic.com?ref=2ci8oqf" target="_blank"><img src="http://i56.tinypic.com/2ci8oqf.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

<a href="http://tinypic.com?ref=al0qoh" target="_blank"><img src="http://i53.tinypic.com/al0qoh.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

 

[CMF_RBLUV]

that is definately very sexy