Fitting RPM gauge

[winstonerogers]

Ok, i would like to have a rev counter.

If its hard to install then sombody just say and don't bother replying, but if its a easy DIY, then please enlighten me.

Thx

89 Micra 1.2 GSX 3 DR

 

[Arnold]

This aint a new question lol! please search the forums, the answer is definitly on here

 

[Speedle]

Hi Mate its very simple to fit a rev counter you can get them from ebay very cheap its a 3 wire job to connect in some case's only two

when you get it, it will have instructions to fit it... hopfully

 

[wildti]

1 wire ground 1 wire swiching power 1 wire - side of coil , mine came wih 7 wires but you just put them into groups.

 

[Fordy]

raceworks sells some very good rev gauges, i know this because if got one in my micra

Link:

http://www.raceworx.co.uk/

 

[bobsp16]

Standard Rev Counter

I have a clock unit which as low milage (68k) from an 1.2 super s that has a rev counter in the clock unit as standard,,look better than a silly counter scrood down on your dash top

 

[Ed]

The built in dash RPMs are quite nice, however, as Arnold said DO A SEARCH. its been covered many many times.