Final product (before buff/polish/tidy up)

CMF_crumpets

» CMF Member
Member since:
Posts:
..
 

Attachments

  • 41928.jpg
    41928.jpg
    82.2 KB · Views: 15

CMF_crumpets

» CMF Member
Member since:
Posts:
Yeah its fitted now, presprayed it to check colour and fitted it later.

Its stock as right now.

Need to source a tuner, the pieces i have got for it.

Custom fuel rail + SR20 TB with plate (from here) + 4 into 1 powder coated headers + R33 AFM with HKS pod + dual cold air intakes + emanage blue + 2 inch exhaust.

Might try and squeeze in some tomei poncams depending when and if i can find a tuner.

Inside just got some mixmatched buckets on some ultra low bride seat rails.

Suspension is lovells springs 30-40mm lower with whiteline front rear sways, panhard rod and anti lift kit. Strut bars to come after xmas.

Brakes are standard N14 jobbos.

Wheels are powder coated N14 ones with some pireli rubber.

Tints are 15%.

My fav part of it is the dash cup holder, that thing is just pure awesomeness
 

CMF_deNs

» CMF Member
Member since:
Posts:
Actually, chris' one is black isn't it? Damn i'd almost forgotten. Never see him on here and I don't think he's ever responded to an email.. ha!

Crumpets: If it were me i'd have powdercoated them white, but given the theme and the fact that white's also a bitch to keep clean it makes sense. Gold would've been cool too - would've looked like bosito's old one.

---dens
 

CMF_crumpets

» CMF Member
Member since:
Posts:
turbo march-rolling shell WROTE:

"deNs WROTE:

" Do not see many/any black ones around.

Specs?

---dens"</div>

i can think of atleast another one :p

looks good. looks like most of your performance mods originated from me lol. i should be able to give you a map for the emanage for a similar setup but with a sr afm
Click to expand...

Basically yes, SR20 plate, fuel rail, headers haha. The plan was to go tight on those bits and get JUN flywheel and TOMEI cams but then the Dollar to Yen went stupid.

Luckily I got front bar, seat rails, spoiler etc just before that.

I might still buy the CAMS at the current rate.

With the SR20 TB, Headers, Fuel Rail, 1.6 injectors, 2inch exhaust, cold air feeds for the filter, R33 AFM and say the Tomei Cams it should make some decent gains.

Any help would be appreciated, as I mentioned I would even drive it to Brisbane haha got a mate whos keen to get away from syd for abit.
 

CMF_crumpets

» CMF Member
Member since:
Posts:
deNs WROTE:

Crumpets: If it were me i'd have powdercoated them white, but given the theme and the fact that white's also a bitch to keep clean it makes sense. Gold would've been cool too - would've looked like bosito's old one.

---dens
Click to expand...

I was planning to attempt either gold or white, but thought go completely black on the wheels, the rear drums, front calipers and toe hook are going to be sprayed candy gold soon which should give a match to the gold pearl.

I am a fan of the black body white wheels or white body black wheels look but decided against it.

You cant see the gold pearl in most pics but in person its insanely good, subtle until you get the right angle then its just gold.
 

CMF_turbo march-rolling shell

» CMF Member
Member since:
Posts:
crumpets WROTE:

"turbo march-rolling shell WROTE:<BR><BR>"
deNs WROTE:<BR><BR><BR><BR>" Do not see many/any black ones around.<BR><BR>Specs?<BR><BR>---dens"</DIV><BR><BR><BR><BR>i can think of atleast another one :p<BR><BR><BR><BR>looks good. looks like most of your performance mods originated from me lol. i should be able to give you a map for the emanage for a similar setup but with a sr afm"</DIV><BR><BR>Basically yes, SR20 plate, fuel rail, headers haha. The plan was to go tight on those bits and get JUN flywheel and TOMEI cams but then the Dollar to Yen went stupid.<BR><BR>Luckily I got front bar, seat rails, spoiler etc just before that.<BR><BR>I might still buy the CAMS at the current rate.<BR><BR>With the SR20 TB, Headers, Fuel Rail, 1.6 injectors, 2inch exhaust, cold air feeds for the filter, R33 AFM and say the Tomei Cams it should make some decent gains.<BR><BR>Any help would be appreciated, as I mentioned I would even drive it to Brisbane haha got a mate whos keen to get away from syd for abit.<BR>
Click to expand...

yeh i'd have a look at it for ya if you get the cams. i wouldn't bother with putting all that gear on with out cams, as without them the gains will be pretty minimal.. cams is where its at.. totally different car with em. more torque, heaps more top end etc. next time i'm on the laptop i'll see if i still got the map, it was for ga15 injectors, impul extractors/impul exhaust, sr20 t/b and afm with tomei cams.
 

CMF_crumpets

» CMF Member
Member since:
Posts:
Well i have those headers I think you made via tris? ga15 injectors 2 inch exhaust and the sr20 tb.. ill suss out the tomei cams next time the exchange rate is happy or after new year.

Ill have to hold off on the jun flywheel.
 

CMF_deNs

» CMF Member
Member since:
Posts:
Please don't spray the drums anything other than black if you are going to repaint them - it doesn't look that great when highlighting the fact that it's a drum rear-end :p Personal preference though.

Heh, I thought it looked a little gold from the highlights on the rear hatch in one of the photos. Would look even better in the flesh.

Who did your custom fuel rail?

---dens
 

CMF_frank2

» CMF Member
Member since:
Posts:
crumpets WROTE:

. ill suss out the tomei cams next time the exchange rate is happy or after new year.<BR>
<BR>
.
Click to expand...

crumpets

hows the $/£ lookin ?, because i,m more than happy with my £80 autosprint inlet cam, tho i wager turbo would,nt be seen dead fitting an extra shim inside the bucket :eek:
 

Attachments

  • 41943.jpg
    41943.jpg
    117.1 KB · Views: 15

CMF_crumpets

» CMF Member
Member since:
Posts:
frank2 WROTE:

crumpets

hows the $/£ lookin ?, because i,m more than happy with my £80 autosprint inlet cam, tho i wager turbo would,nt be seen dead fitting an extra shim inside the bucket :eek:
Click to expand...

Not too bad, plus i got alot of family over there (southport/liverpool) so that helps with shipping etc

Its just about getting most value for money I guess :)
 

CMF_crumpets

» CMF Member
Member since:
Posts:
Might go gold on the wheels after some thought..

Mates are trying to get me to spray em candy gold, get nissan badges and tow hook sprayed same also
 

CMF_crumpets

» CMF Member
Member since:
Posts:
I want to keep the wheels light and to be honest I cant afford new wheels haha

So N14 powder coated wheels will do!!

Id rather buy Tomei cams and JUN flywheel than some new big ass mofo wheels
 

CMF_deNs

» CMF Member
Member since:
Posts:
Keep wheels small and light.. 16's don't go well at all in my books.

Gold N14 wheels, keep de-badged, gold tow-hook. :) Drop it an inch more though! Front bar is looking great. It's also one of the few cars that I agree with putting the bubble cluster rear lights on too. Maybe it's because it's black..

---dens
 

CMF_crumpets

» CMF Member
Member since:
Posts:
Yeah the rear lovells are stuffed, they stuffed me and NSM around abit.. rushed em through and they are not the right height

Need to revisit them.. useless asses

Yeah I am thinking of darking the red part of the bubbles and leaving the clear 'bubbles' to match the clear on the fogs

I think it will look pretty good like that
 

CMF_daily_ricer

» CMF Member
Member since:
Posts:
Looks awesome mate! I agree with the idea of keeping the rims black or maybe possibly going a gunmetal finish. An all black car like that with dark tints etc would look a bit lame IMO with something high contrast on such small diameter rim.

I'd be adjusting your bonnet or the front right guard a bit though, from some of those pics, the front right corners seem to be out of alignment by at least 10mm or so! Maybe even your drivers door? I need to do the same to Charlotte, the distance between the bottom of the headlights and the grill is about half that of the gap between the bonnet and the top edge of the headlights.

I can't really tell fromt he photos, but did you have the door and hatch handles sprayed also? I'd personally leave the badges chrome, and do the tow hooks red.
 

CMF_crumpets

» CMF Member
Member since:
Posts:
Further updates;

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5293.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5294.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5295.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5296.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5297.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5298.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5299.jpg" border="0" alt="Photobucket"></a>

<a href="http://s371.photobucket.com/albums/oo159/ctitho/?action=view&current=IMG_5293.jpg" target="_blank"><img src="http://i371.photobucket.com/albums/oo159/ctitho/IMG_5300.jpg" border="0" alt="Photobucket"></a>
 

CMF_crumpets

» CMF Member
Member since:
Posts:
I would not mind a demister button, the hole was covered by a fog switch (bought from uk ebay) but I could use the demister button for some other button push functionality! Go Go gadget rockets or something!

Pick up my lame number plates today also which is good fun
 
You must log in or register to reply here.

Similar threads

Helloween
The Final Product -----
Replies
20
Views
2K
Helloween
Helloween
Finto_GX
K11 Tidy Up
Replies
6
Views
1K
Finto_GX
Finto_GX
k11_998
Product reviews
Replies
0
Views
587
k11_998
k11_998
C
Polish your knob.
Replies
6
Views
155
CMF_Toma
C
R
Tidy Rev-Counter Wiring
Replies
0
Views
850
rlees85
R
Back
Top