back box

[danmicra]

iv got a universal back box but will it fit?
i was thinkin i would have to cut an weld it to fit am i correct? has anyone fitted one b4 just to give me a few pointers
thanks for any help
dan

 

[K10Daz]

You will need to weld up some hangers, and get it welded onto your existing pipe mate, you could always just use a Uclamp that would do! Welding is safer tho m8!

Daz

 

[danmicra]

so when i remove the the standerd back box just cut off the pipe an weld it onto my new one?

 

[K10Daz]

yeh, leave a good bit of pipe so you can trim more off if need be, dont cut too far and have too short pipe and it wont fit if you get me mate.

 

[danmicra]

ok cheers dude ill go give it a go an see what happens

 

[K10Daz]

cool, get some pics up

 

[Broony]

just cut the pipe to where you need so thew exhaust will fit when welded you should have a bracket or brace if not on it stainless steel juts grind your original exhaust hangers off and weld them to ur new back box so they will fit in your original rubbers then just weld your uni box to the existing pipe

 

[danmicra]

ok its up on the stands the now just gona atempt these bolts the look ruff ill get some pic up when im finished!

 

[Broony]

ah yes you might have to replace them so make sure u get some spare as you may have to grind them off,