Search results

Hello, just my opinion but sounds like the ball joint on the lowere suspension arm, especially if you replaced the cv joint, also could be the track rod end?

humm... i dont know about that, you measure your chassie rails and ill measure mine (bottom of cahssie rail to ground) im at 60mm... humm... i think its a tad low as the sway bar now has some deep groves in it. haha Im gunna measure to the chassis rails today i think but i had to raise it half...

ill see if i can get some more pics tonight.

They came from a 1999 vauxhall / opel corsa 1.6 sport, i really dont think they vary though. All i had to do was drill out the strut top by about 1mm and open up the gap for where it bolts onto the hub, the rear springs look they wont work but do fit in well. I really do want to say that i hold...

hey sorry about the pic it usually is clean, the bumpers come up like new but had just fitted the coilovers and needed a pic, will take another on a good day when its clean. The sump doesnt catch but the cat does underneath because the exhaust is sagging down? there is a huge down side and thats...

Heres some pics of my little micra with newly fitted coilovers and jap headlights? got a set of super s clocks inside, oh and obviously the de badged grill. more to come hopefully but this it for now. let me know what u think n if it can be improved? Oh and is it the lowest in the uk?? and its...

Just curious to know if other people are running there micra's down the 1/4. I did the other weekend apart from the only mods i had was an aftermarket filter and the fact i had taken everything out of the inside. I best run i got was 17.5 seconds @ 75mph which isnt the best i know but i was in a...

Was thinking about putting 1.3 cams in but thought its over much work getting the timing done n all that if im going to put the 1.3 in, but does a 1.6 throttle body go straight on to either engine? also is it just the tb of an almera? ahhh and one more thing i seen a 1.3 fuel rail with 1.6...

Hi all, i own a silver 1995 3 door 1.0 lx. done a few little things to it like bought some super s dials and got it lowered to about 50mm with 15" tsw alloys, and also removed the cat. and made my own air intake. I am currently saving up for a 1.3 motor and headers along with a 2" cat back...

Thanks frank, but got a tip about the 155/70/13, i work for a tyre wholesaler which is nothing to boast about but get to try different tyres all the time n i found that you can get for the same price 155/65/13 which have a lower profile and dont flex on the side walls when pushing it round...

Sorry another thing is, if i bought headers, cat back exhasut and a fuel pressure regulator and other tuning mods will they fit both my 1.0 and 1.3 when i get hold of the engine?

Is that the standard rear springs of the suzuki? Also i bought some 15@ alloys for the little micra and it slowed it down like nothing else but when i got the standard 13"inch steelys on it goes like it should but just looks ..... well you know haha! whats best wheels to use without losing any...

Hi all, Got a question which i cant seem to find the answer to on the net so thought i would see if anyone knew. Is there lowering springs which lower the k11 further then 35/40 mm? Or do you have to buy coil overs to achieve this? Also does anyone know of were i can purchase ( new or second...