Search results

You'll find the door handles snap off too ;-) Oh, and Nissan charge about £50 for the tailgate handle

Have a look at this article. http://www.micra.com.au/technical-articles/factory-bolt-ons.php It's a well known fact Sunny/Pulsar GTi-R brakes will fit without too much work, and Almera/Pulsar N15 brakes too. You will need at least 14 inch wheels though. Then it's a matter of which brake pad...

DIV><BR><BR>well their you go eh... is the kit any good sportsclassic? compared to the stocko super s offering?<BR><BR> It essentially turns your drum braked rear axle into the "stock" Super S rear axle. Same calipers, discs, etc

The PCV traps oil particles vented from the cam cover breather. It should be changed whenever you change the air filter element. It can become saturated with oil if it hasn't been changed for a while and leak into the air box. The air filter element will get dirty and appear black. Time for a...

Yes, he was also at Abingdon, servicing next to Abi. This was Matt's first outing for the car and first rally Matt has competed on for some years. Matt's car looks amazing, a lot of time and effort has been put into his Micra, it was almost a shame to get it dirty! Unfortunately, he had a...

I thought I might share this picture of Abi Mahmood in his georgeous Nissan Motorsport Europe built Kit Car. I believe only three were ever built and rallied. This one was driven by Mark Higgins in 1997 when the UK motorsport governing body introduced the new F2 (front wheel drive only) rules...

27150-41... was the original early K11 part number. The resistor has been superceeded many times ending with the latest number 72B01. The newer version is slightly smaller and maybe more durable?!

Sounds OK to me. The needle on our rally car oil gauge goes off the scale when the engine is cold and settles down to about 30-ish at idle and 70-80 psi at 7000 rpm once warmed up.

I think the part he's after fits either side of the RH engine mount. Where the cast mounting bolts to the chassis bracket there are two crescent shaped rubber buffers... usually!

Hi Alex. I've just looked the part up on UK look-up and there's a choice depending on engine size, auto or manual transmission and age. If you go to your friendly Nissan dealer the Part Code you need is:- 11215 The Part Nos. could be 11215-41B01 11215-41B03...

I used to work in the Parts Dept. of a Nissan Dealership in the UK. A lot of O.E Accessories won't be available anymore. Unless it's a recent model or top selling part like mudflaps and floor mats Nissan tend not to keep producing accessories. :-(

We've just had our Micra rally car rolling road setup - 93.9hp at the wheels which we're pleased with. We have a standard bottom end and standard head about 100000 miles on it (it just won't give up). Emerald K3 Engine Management. Tomei Cams. Suzuki GSXR 600 throttle bodies. Standard Micra 1.3...

The fuel pump normally clicks for a second or so when you first switch on, you can normally hear it outside the car if it's working. Is the engine fault light flashing on the instrument cluster when your ignition is on? If it is your key has probably lost it's NATS code (if your car has NATS of...

Thanks for the replies guys. That has cleared that up then. Why are you selling your Piper cams Jaxx? Warren

Does anyone know if Tomei still do 2 types of camshaft ie: Procam and Ponscam. I have ordered a Procam for my rally Micra but it seems Tomei now only do 1 camshaft for the CG13DE engine which has less of a duration than the Procam. Any ideas? Thanks Warren

Don't forget, you don't have to drive your car on the rev limiter all the time! :-)

You can get the cross member as a separate part. However, the headlamp panels are spot welded to it and the chassis legs too.

Don't know of a 'speed' limiter. There is a rev limiter, but that should cut in at 6500 rpm. At least that applies to UK K11's.