Recent content by CB 182

  1. C

    need wishbone bolts

    Bolt £4.60, nut 87p, £6.43 in total inc vat from nissan
  2. C

    Front roll bar drop links

    OK, fitted the new one, but looks so wrong compared to the original ! http://i793.photobucket.com/albums/yy217/CB_182/032.jpg http://i793.photobucket.com/albums/yy217/CB_182/031.jpg
  3. C

    Front roll bar drop links

    Frank, where does the spacer go, through the roll bar, the wishbone or between the two ?
  4. C

    Front roll bar drop links

    Not from here but look identical. http://cgi.ebay.co.uk/Nissan-Stabilizer-Drop-Link-Micra-1-5-1-4-1-0-1-3-CG10_W0QQitemZ360226313787QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item53df29563b
  5. C

    Front roll bar drop links

    Bump !
  6. C

    Front roll bar drop links

    Has anyone fitted non genuine nissan anti roll bar drop links ? One of mine had snapped so I bought a replacement (long bolt, 4 rubber bushes, 4 big washers, a steel spacer/bush and a nut). But it seems to be too long, does anyone know how its supposed to be fitted ? Thanks Chris
  7. C

    a/c compressor clutch - relay location ?

    as above, does anyone know the location of the relay for a/c clutch ? Thanks
  8. C

    CV joint question

    Hi Frank, I've pushed, pulled & twisted the shaft and can't pull it out of the joint. Obviously its on for a reason otherwise it wouldn't be there (maybe a full lock burnt out would dis lodge it ! ) Chris
  9. C

    CV joint question

    Are we talking inner or outer cv joint here ? The outer one has a solid ring on the end of the splines and then a groove about half way along for the spring clip, when I did mine the spring clip snapped so put it back on without it, been ok for over a year now
  10. C

    Alternator belt squeal

    I just replaced the belts on my car today, see my guide/post (depending if you have a/c & PAS ?)
  11. C

    Alternator A/C & Water pump PAS belts 1 ltr

    Having replaced the PAS and alternator belts today I thought I'd write a few notes about it seeing as the haynes is not exactly correct (for my model at least) 98 1 ltr with PAS & A/C. Alternator A/C belt: 1. Jack the car up and support it on axle stands, remove O/S/F wheel. 2. Remove...
  12. C

    Front Wipers sticking

    Fixed. Removed the front cover off the wiper gear and cleaned the 3 contacts up, working fine now.
  13. C

    Help car wont go

    did you 1st start it then turn it straight off, as in 5 or 10 seconds ? Is so crank it over as much as you can and it should start
  14. C

    Front Wipers sticking

    The front wipers on my 98 twister ocassionaly stick in the vertical position. If I pull them slighty (towards the drivers side) off they go, is the some contacts in the wiper motor that need cleaning up, or something else ? Thanks Chris
  15. C

    no brakes HELP.!!

    did you bleed the fronts ?
See more
Back
Top