just got a sport+ and was sorting out the electric windows (glass come out of runner) and found this grey plug unsed on the door, theres one on each door.
been bugging me wondering what there for, anyone know?
Item: k10 super s bits + other bits job lot
Reason for selling:
Can’t see me buying a k10 again so might as well sell all the bits I’ve been hoarding from when I scraped my k10 L, was hoping to get another k10 but can’t afford to run 2...
use a 10mm spanner to loosen the screws/bolts holding the coil packs onto the spark plugs then you can use a screw driver .
its a lot easier to get too the oil filter from underneath, near impossible to reach from above, remember to smear some fresh oil onto the rubber seal of the new filter...
ok problem now sorted:D
i put a maf in out of a almera from scrappy, genuine nissan maf and had to solder the temp sensor on as almeras have this located elsewhere.
then went and put the old lambda sensor in and its running sweet again, ( runs and touchs wood).
so looks like the universal...
cant find my multimeter so cant get readings direct off the o2 sensor but have been out in car with diagnostics to get voltage readings and when driving its 0.00v and when you let it idle it fluctuates between 0.460v-0.560v and nothing at wot either.
in the section where is says what loop its...
cheers will double check tomoz the wot,
i dont think its going into closed loop atall, on the diagnostics it never says closed loop, just open loop then when revved a few times, says open loop fault:confused:
one last question then im giving up with it.
when its fully warmed up i get readings from the 02 sensor but as soon as you touch the throttle, i get no readings from it.
which sort of explains why when i took it for the mot the emissions where spot on at idle but when you revved it they went...
ok now im ready to take a lighter to this car:mad:
when i hold the revs up around 3k rpm , im getting 'open loop fault' under the value for the fuel system status.
also im now only getting a voltage from the front 02 sensor for short period when first started, then i just get 0.00v and might...