offset question

[ohc_turbo]

does anyone know off the top of their head whats the standard offset on the k10?

and the width of a standard steel wheel and what size tyre it takes as standard?

cheers

 

[Arnold]

4x100 PCD with an offset of 35/38

Standard steel wheels differ because some were 12" and some were 13", but something along the lines of 155 / 75 was the tyre size

 

[ohc_turbo]

and i take it rim width is about 4J to 4.5J

 

[Speedle]

rim width can be bigger than that mate standard k10 alloys are 5J

offset can be from 35- 42 iirc although tbh between 38-42 is the recomended

 

[ohc_turbo]

cheers lads

 

[Speedle]

your welcome

 

[SammoHung]

early standard steel wheels were 4J, the more recent were 5J

 

[Ne1LL]

any chance a 7j 14inch wheel with offset of 25 would fit ? I want a pair of those you see...

 

[SammoHung]

i reccon that they would stick out past the arch and wouldnt MOT.

also I reccon your wheal bearings would be put under a bit too much stress and would fail early.

also if your lowered thay may rub with stearing