bought car. its a bit wrecked. immediately had to fill with brake fluid, followed by new pads, front hubs and wishbones. started strip with spare wheel, all rear trim and seats. shortly followed by the rest of the interior of the car excluding front seats, top half of dash and sun visors. gear knob replaced with wooden cube.
Removed air filter, resonator and top of airbox, leaving only the bottom half and mesh covering the throttle body. later removed bottom half of airbox and replaced with inlet trumpet on the throttle body.
moved power steering reservoir to bulkhead.
painted 5-spoke 14 alloys white.
created custom HT leads with original brass connectors and 7mm copper core ignition lead.
replaced spark plugs with Bosch Super 4's and gapped to 2.2mm
Removed air filter, resonator and top of airbox, leaving only the bottom half and mesh covering the throttle body. later removed bottom half of airbox and replaced with inlet trumpet on the throttle body.
moved power steering reservoir to bulkhead.
painted 5-spoke 14 alloys white.
created custom HT leads with original brass connectors and 7mm copper core ignition lead.
replaced spark plugs with Bosch Super 4's and gapped to 2.2mm
