FS: Steering Wheel, Turbo Parts, Radiator, Interior Bits, Hatch, Guard, Mirrors, Hatch Handle etc et

smidge · Aug 11, 2008

CMF_Jon (2) · Aug 11, 2008

wheres the pics?

smidge · Aug 11, 2008

right there...

CMF_crumpets · Aug 11, 2008

My drivers side front light is buggered also (mounts) i got an awesome setup of solastic no nails duct tape and karma holding it in place.

I would not mind your tints if that other gent still doesnt want them depending on the price.

CMF_tris · Aug 11, 2008

need a new muffler... but what the go with that one?? howcome there are 2 pipes on either end??

CMF_crumpets · Aug 11, 2008

Also air conditioner condensor (side of radiator) do you still have yours? Mine is bent in strange contorted angles (bought Micra after an accident).

CMF_turbo march-rolling shell · Aug 11, 2008

haha smidge. your a funny kent. plus.. i believe thats a drivers side guard you have a pic of their. if your gonna personally deliver a bonnet to me, then i'll take one

(assuming your going to split up that mountain of parts in your garage) oh, and the front bar and grille look very smidge spec.. your not fooling anyone

CMF_D1cefiro · Aug 11, 2008

Oi smidge is that $165 for the turbo plus pipes??

anything wrong with the turbo??

Did u ever run it on a CG?

Just wanna know what it went like.

CMF_qwerty132 · Aug 11, 2008

Hey Smidge..

Im interested in the hatch handle thingo as long as all the mounts are ok(not cracked like mine)...
Can you hang onto it for me until next week? How much to post to 4120?

Have you got any good gas struts for the hatch? Good door handles?

Thanks
qwerty132

smidge · Aug 11, 2008

got a few good door handles

D1cefiro WROTE:

"Oi smidge is that $165 for the turbo plus pipes??

anything wrong with the turbo??

Did u ever run it on a CG?

Just wanna know what it went like.

for everything in the pic, spare exhaust manifold and all the pipes you need to mount it up with a bit of creative welding (like some uk boys have done on the cheap, turbo hanging off the end of a cut up stock exhaust manifold, got a pic somewhere)

never ran it on the k11 unfortunately! turbos in good condition visually

smidge · Aug 11, 2008

qwerty132 WROTE:

"hatch handle thingo as long as all the mounts are ok(not cracked like mine)...

Can you hang onto it for me until next week? How much to post to 4120?

Have you got any good gas struts for the hatch? Good door handles?

gas struts in the hatch on the car at the moment are fine but that will stay with the hatch, the blue hatch pictured doesn't have any struts iirc

hatch handle i think i actually have two of them, still got 3 boxes of K11 stuff to go through!

sorry if it takes a while to get you the stuff have to sort them out and post them around a full time job and a 2nd job... not gonna make enough out of this to wreck micra's all day!

smidge · Aug 11, 2008

tris WROTE:
"need a new muffler... but what the go with that one?? howcome there are 2 pipes on either end??

it was used on a gti-r in the ****test configuration possible, a 180 degree bend on one end

not sure how you'd use it, thats why its cheap!

CMF_qwerty132 · Aug 12, 2008

Hey,

Im not in any rush for it... Ive been too busy wuth other stuff to actually go to a wrecker and find one.

Can you figure out post to 4120 when you have a chance...

Thanks
qwerty132

smidge · Aug 18, 2008

more parts on their way guys, just sorting through emails now.. if i haven't replied hit me up again so i can start sending stuff out...

got door handles, a few interior parts, aircon vents, stock injector rails and other bits... pics to come

smidge · Aug 18, 2008

more parts... will divide up into own threads or throw on ebay if its too hard, first dibs here though...

Stock steering wheel
http://members.iinet.net.au/~martinm/cars/micrafs/micrafs-lot2-1.jpg

Dash Panel
http://members.iinet.net.au/~martinm/cars/micrafs/micrafs-lot2-2.jpg

Door handles, painted and peeling
http://members.iinet.net.au/~martinm/cars/micrafs/micrafs-lot2-3.jpg

Stock fuel rail, condition unknown but looks fine
http://members.iinet.net.au/~martinm/cars/micrafs/micrafs-lot2-4.jpg

Speaker grilles, dunno how i ended up with three

CMF_crumpets · Aug 18, 2008

Ill take the console and get fibreglassing, ill also take the other stuff mentioned.. might as well send myself broke with some diy crap i can do

cheers yo

CMF_Marshal · Aug 19, 2008

hey mate how much do you want for the switches????

CMF_deNs · Aug 20, 2008

Ooh! Reckon you could somehow box up the green grille for me and send it down my way?

Just let me know what you'd like for it.

Edit: Sent you an accompanying email!

Cheers,

---dens

smidge · Aug 20, 2008

$5 each for the switches and blanks

CMF_Marshal · Aug 20, 2008

hey mate i will take the switches. how you want me to pay??? bank deposit ok??

smidge · Aug 20, 2008

yeah bank deposit or paypal, send me an email to [email protected] and i'll reply with all the details you need, how many switches you want?

CMF_Marshal · Aug 20, 2008

you a centre console out of a k11

smidge · Aug 25, 2008

yep i've got two, one thats painted black but has some spots of primer on it, and one plain grey one as in the pics above

got a few vents too but not 100% weather i've got left or right etc

shoot me an email if you like so i can keep track of what you want and talk about dollars etc

CMF_LonePhantom · Aug 26, 2008

Hey smidge do you have spare pulleys for the water pump and alternator? I can't remember which one has the problem on my LX but it sounds like the bearings might be stuffed in one of them. If you have them are the bearings still ok?

smidge · Aug 26, 2008

only pully i can spare is the one used to adjust the alternator belt on A/C cars...

not wrecking the actual motor so that will stay complete with pullys

CMF_Marshal · Aug 28, 2008

hey have you got a radiator bottle i was working in the engine and put my finger right through it whoops

cheers

CMF_littlebear · Aug 28, 2008

Marshal WROTE:

"hey have you got a radiator bottle i was working in the engine and put my finger right through it whoops

cheers

I think we have all done that! Some sort of right of passage into the Micra world

CMF_Marshal · Aug 28, 2008

littlebear WROTE:

"Marshal WROTE: "hey have you got a radiator bottle i was working in the engine and put my finger right through it whoops cheers"</DIV> I think we have all done that! Some sort of right of passage into the Micra world

it sucks i patched it up the first time but not this time

CMF_fred · Aug 30, 2008

Im nearly tempted re the turbo stuff, to modd the intercooler for micra but I already have one and not sure If anyone wants one..... and I gotta do another manifold, anywho

smidge · Aug 31, 2008

hey mate, got two radiator bottles, $45 posted for the perfect one, $35 for the one with some brown gunk but otherwise also fine

(i think they're around $100 new from nissan so figure thats a fair-ish price)

smidge · Sep 12, 2008

most parts listed here:

http://search.ebay.com.au/_W0QQsassZsmidge20

FS: Steering Wheel, Turbo Parts, Radiator, Interior Bits, Hatch, Guard, Mirrors, Hatch Handle etc et

Similar threads