Finding the right position to set & tighten front wipers???

[3706mht]

Evening all.

Classic! Resealed the leaking windscreen, replaced the park relay....100% result thanks to great advice off MSC members.

But did I tape mark the front wiper positions before removing them? No and guess what, they park now but go down too far and move up screen with a clunk/click. I've fitted them in the wrong position but struggling see how to get the right position.

Also to check .... fitted the shorter arm on the drivers side and the longer on passenger side ... hopefully right but would like to check that.

Advice how to set the position and tighten up the nut would be hugely appreciated.

Cheers

 

[3706mht]

Ok am fairly sure the blades were the wrong way round .... now swapped round and its improved but after wipers go to lowest position (right by or over screen edge nearest engine) they move up screen ... not hitting or making a noise now but seem park a little high up screen.

Any ideas how set that right?

Thanks