CVT swap CG 10 to CG13

[CMF_Karim]

Can anyone tell me if a N-CVT gearbox from a Micra K11 99-02 CG10 engine block, will fit directly on a CG13 engine block?

 

[CMF_frank2]

they,re all the same flange/fitting on the crankshaft karim, so i would say yes
are you fitting your coilpack head to the CG13 block ?

frank

 

[CMF_Karim]

Hello Frank. My problem is that I have a 1,3 L engine with a CVT gear that is dying. A repair at Nissan has been quoted at 1600Euro(!), but I have been offered a low mileage CVT box from a broker for 800Euro. This comes from a 1,0L engine, but before we start disassembling, I would like to have a notion if it's worth while. Is there a difference in the coilpack head between CG10 and CG13 engine blocks?

 

[CMF_frank2]

the looms, ecu,s throttlebody,s and sensors etc are different for coilpack models karim, personally i would fit a manual g/box

frank

 

[CMF_Karim]

My intention was only to take the CVT from the 1,0L engine and mount it on my 1,3L engine, but according to you, that is a straight swap?

 

[CMF_frank2]

i think you may run into problems karim, the coilpack ones have a crank sensor mounted on the g/box and the 1.3 and 1.0 have a different dish on the drive plate (the 2 on the left)

 

[CMF_Karim]

Thanks for the input, Frank. Could you tell where the gearbox number/code is located on the CVT boxes?

 

[CMF_Karim]

My gearbox number is N3-TB40NRG1AA, and the broker offers a NJ-TC46NHF1AA. Would a swap still be possible, or is it to complicated?