Search results

cool thanks, He has just told me he hasnt got the studs. i assume my original studs wont fit? if not, how much will you want for yours gtsnissanb?

100mm The ebay guy said "The PCD is 100mm. " this correct?

just checked Its studs on my micra, just been out to check. Thanks

you guys rule! thanks. so they should fit, ill wait to see if the seller has the nuts and if so i still need to win the auction. What do you think my max should be? ill come back about your nuts if necessary if i need them, again thanks for the offer. Frazer

Hi, i have handed my 55 160sr over to the wife for a year or so and she is violating the alloys daily !! help:frown: I have found some wheels on ebay but don't know if they will fit. I thought i would ask you guys in case some one has seen them before and knows. I have asked the chap to measure...

same problem Hi, keep us up dated, i have a 160 with the same problem. I did think it could have been a bolt that i dropped down the dash when i removed the radio but i dont think so now after reading this. i will have another look and post back if i find anything. Actually, i drove my farthers...

I have a bit more time to have a play, then i must put it back and try to reset the engine light as i have a test on Monday in Dorchester

Hi Rich, i think so?!?? Boys? is the 1-7 representing full travel up and down or mm? not sure i understand. Frazer

Yes, i don't think the graph is that accurate, as the car did feel better with 4 diodes, but i am thinking that the reason could be because the part of the trac now in use ( the bit after 2mm) might have a shallower curve on it? poss, i dont know. at one point ( dont laugh ) i considered...

oops, sorry guys. i feel bad that there is some friction, MSG2 did say there could be but through inexperience with forums i didn't understand. Please everyone calm down, i need all your support. I have now test driven the car with 4 diodes, please see the diagram. I have a feeling that the...

Hi Ed, please dont loose interest, you and MSG2 have all the brains here!! I need you both !! the diode method might still stumble, i dont even know what you you mean by "pics" yet!! dont go..... Hi, just a little info on why i would benifit from this mod. mostly all my pupils have no...

Hi, when the youtube videos load, you will see just how little the pedal had to move to rev right up to 5000rpm, i am sure a spring will work a bit but it is sooooooo sensitive!

Come on youTube !! sort it out!

Hi, it takes a little time for youtube to process them, they should work soon. i will try what you suggested with the diodes and not let it open circuit, but i did turn the ign off every time i changed anything. it makes sence though, once it learns with the diodes in place, removing will make...

I am uploading some utube videos of some tests right now, I will put the links up as soon as they are ready! ( 30 mins i expect ) http://uk.youtube.com/watch?v=-vodni23RR4 http://uk.youtube.com/watch?v=202OgOWOyZE http://uk.youtube.com/watch?v=ttOnQ5MPlVo There is a snag even if this 4 diode...

Hi, I have done some testing, I got all the bits from Maplins and I connected the diode as per the diagram, here are the results. I connected the diode and the car started normally and ticked over at aprox 1000rpm which is normal I think, cant remember what it was before I started to mess with...

Hi, i am just about to shoot down to maplin for some bits, i will have time today to try stuff and report back, do i just ask for 3 or 4 regular silicon diodes or do they have a proper name, and what about a few combinations of resistors of different values. as soon as you confirm i will go...

Hi, i did these two diagrams before i checked the forum, here is what i have Frazer

Hi, what i meant was, there is a copper track running the length of the top and bottom strip, have a close look at the bottom picture, so they are not variable like the middle to strips. Yes i woulds like to add resistors to the external wiring so that i can short out the added resistors with a...

I have removed the strip and put it on the scanner, then I noticed that 2 of the strips have a solid connection running through them, so I scanned the other side to show you and flipped it so it matches the other side for comparison. ---------------------------------------------------------