Search results

Oh so the seals come out without the need to take the cover off? Awesome. that's the info I was looking for ;) also, another satisfied throttle body resolder customer right here! Worked a charm.

Have you looked under the inside of a rocker cover when you take it off? I've got to get at the spark plug seals and there seems to be no way to pull the plate off which is holding them in. apart from drilling the little rivet like things.

While we're at it... how the fudge do i get the cover off on the underside of the rocker cover. I heard it was hard... and now I find no screw holes.... Im not drilling out all these things am I?

Anyone use gasket sealant with new rocker cover gaskets? I wasnt going to but the old one had heaps of the stuff... making me think someone tried to reuse an old gasket? Which is why it was leaking/needing replacement?

Sorry to bring up an old thread, but having this same problem. Ordered a cam cover gasket thinking it'd have the spark plug seals on the cam cover gasket. Now spark plug #1 is full of oil, are these gaskets I need to buy or can I use gasket goo? Anyone have these gaskets for sale? Part numbers...

Buy some sb barina rear shocks and matiz rear springs. Put that in the rear but you'll need to grind some of the shock lower bush tube cause its too wide to fit in the stock micra. I cut the standard springs on front shocks so its just captive and its a good height now. Don't waste any more...

I dunno, there's one place I might have to visit. ill give them a shot tomorrow. Alloy as far as I know, e30 bmw bottlecap wheels.

Other alternative, longer studs and some 10mm spacers.

Hey all, this is really only to Adelaide members. Just seeing if someone out there would be able to help bore out the centre of my new wheels a little. The wheels have a thinner bore where the hub centre bit slots in and the wheel doesn't fit on snug :( Wheel shops are quoting me $70.... per...

Hey everyone, hope you all had a good Christmas! Just posting on here for general opinions. I've sorted out cars suspension, and I've bought some wheels! Bow bottle caps in 14x6" +25 so they should sit nicely I think. they'll be all white too. Now as for tyres, i have some 165/55-14s that I...

Ohk, well I've got the strut tops off the matiz struts but can't get the tops off the micra struts.... the hole in the top of the cone thing is too small to get a spanner in so I can't get anything on to the bit of the bolt sticking upwards which is flat. And then the problem of putting the new...

Nah there's a big 8 sided nut thing on the top of the matiz strut which won't even fit in the strut top hole... going to have to swap the tops :( another day....

****! Going to put the matiz struts in and they dont fit in the micra strut standard holes. any tips on removing the micra top hats? Ill need a spring compressor now right? On my way to the shop :(

^what he said.

Don't have a press to get the bush out. I'll go to a suspension joint to see if someone will have a smaller sleeve to go in. Also, since the shocks aren't the shorter stroke and I *cough* forgot *cough* to put in the bump stop it rattles around like crazy, will fix this on Friday. Seems like...

Barina SB shocks have a wider metal sleeve in the bottom! Have to get a new bottom bush/sleve in there. Springs are in but just waiting on sag now...

Well what do you know! I have front suspension on its way, have back suspension sitting in the back of my car(boot, not installed..... yet) and I have some wheels waiting for me too ;) I'll reveal once I have them in my arms! BUT as far as tires go, where would be the best bet for some...

Oh Doom, from Adelaide too! Im eastern suburbs, Burnside at the moment. You?

Anyone know where to get the matiz bits? And which Barina?? Hotfunk, they not chopped matiz springs?

Here's the beast