Search results

  1. C

    A photo of my Micra!

    What's up with £400 for a bodykit?
  2. C

    My Micra GX

    Engine mods have been removing CG10 (98500 miles) and replacing it with a CG13 (with 45000 miles on the clock) K&N 57i Induction Kit Maniflow 4-2-1 Manifold with Janspeed Rally Exhaust System. Got a set of Piper fast road cams waiting to go in. Will be getting a full re-map with the aid of...
  3. C

    My Micra GX

    ANd then why not add something just a little bit different!!! In car Karaoke! Still need to do a bit of tidying up on the whole thing but getting there!!
  4. C

    My Micra GX

    Little 8" touch screen monitor to play with!
  5. C

    My Micra GX

    After getting bored I decided to work on the ICE! Thought what better way than installing a PC into my glove box, so I did! 1.5GHZ, 512MB Ram, 60GB HDD, Windows 2000 :) sweet ICE!
  6. C

    Wanted urgently: Load sensing valve rear brakes!!

    Faird, The rear brake sensing valve is located underneath the car towards the passenger side. It looks similar to a mini shock absorber with a spring round the outside, with some metal pipes going to and from it. This is going back on my memory when I had to work on mine in september. WHat...
  7. C

    Quad throttle bodies install

    Any more development on this? These things look great!!!
  8. C

    Where have all the competition bits gone

    Alessandro, Maniflow Manifold will not wit with Air-Con, neither will Janspeed. You will either need a custom one, or I think there is an option in Japan for a manifold that will fit around air-con, but not certain on that!
  9. C

    Wanted urgently: Load sensing valve rear brakes!!

    Well anyone wants anything give me a shout and I'll see what I can get hold of, I can go to 4 local scrap yards (within 20-30 KMs) and probably find more than 20 Micras! Mainly K11s with the odd K10 and K12
  10. C

    Wanted urgently: Load sensing valve rear brakes!!

    Well I was lucky, mine had only ceased rather than completly gone wrong. Ouch....roughly £250 if my currency conversion is any good! Over here I would have just gone to the scrapyard to find 1!
  11. C

    Can I swap my ECU?

    I think the non-nats ECUs were from the early K11 Pre 94 I think. Sadly the NATS to Non-NATS is not a straight swap, I had to get the wires moved all around for it to work. To get an ECU re-programmed I would probably say that would have to be a Nissan jobby.
  12. C

    Can I swap my ECU?

    If you changed the ECU you would need to get the key re-programmed to match the new ECU. Basically your car would just turn over but wouldn't start as the immobiliser wouldn't be de-activated! When my immobiliser went wrong I had my friend fit an older ECU from a non-nats K11, so now my car is...
  13. C

    Wanted urgently: Load sensing valve rear brakes!!

    I know when my rear brake valve ceased on my car, I soaked it in WD40 for 3 days and all was good. This may not help, but it's the only thing I can say on the subject.
  14. C

    My Micra GX

    Piccy
  15. C

    My Micra GX

    Piccy
  16. C

    My Micra GX

    Piccy
  17. C

    My Micra GX

    Another PIC
  18. C

    My Micra GX

    And this is the car now!!!! After NATS went FUBAR!!!! I had the engine replaced, exhaust replaced with a Maniflow 4-2-1 Manifold, and Janspeed Rally exhaut. Not expecting everyone to like it as I have gone well away from the JAP style that you all love. But it is different!
  19. C

    My Micra GX

    Been a while since I posted on here, Thought i'd share the progress of my car. This was my first Micra Meet down in Brighton (England) in May 06!!!! A standard CG10 Nissan Micra GX Then the progress in October 2006 Still a CG10 Slightly Modded Nissan Micra GX
  20. C

    CGA3DE turbo?

    Nis on the MSC has completed doing the CGA3 turbo conversion and is reaching over 200 BHP. Maybe this thread could give you some insight http://www.micra.org.uk/showthread.php?t=12242
Back
Top