I should also mention that when I put the indicator stalk to the second headlight position which should be dipped headlights - I get the high beam indication on my dash
Here is sidelights only - DASH INDICATION OFF
Dipped headlights - DASH INDICATION ON
Main High Beam - DASH INDICATION ON...
I'll get a picture tommorow - it's too dark now!
Which of the three wires connecting to the bulb is the earth? Where would I check to see if there is an earthing problem?
Thanks!
EDIT: Decided to take them now anyway lol
When I use the stalk to engage main beams - I get no beam on the drivers side! Normal headlights and sidelights are fine!
I've checked fuses
Replaced both bulbs
And the connectors were recently replaced and do not look melted at all!
Any ideas?
My kit has only one wire.
I ended up breaking open an old laptop power supply, extracting some Diodes and wiring up my own circuit using them and the two indicator wires.
Now all I need is to somehow get the car finder function to work by finding the horn negative wire.
No luck so far!
For reasons beyond me, the hazzzard switch has 8 wires. One of these 8 wires make all the indicators on the left flash and one does the same on the right.
I cant connect both without diodes or when indicating normally, i get hazzards.
There does not appear to be a single wire within the...
Managed to get the locks working great.
I've got a problem with the indicators and the horn feature, though.
There are a ton of wires within the steering wheel.
I have one wire from my kit which needs to be connected to the "horn negative".
Does anybody have any idea what color this wire is...