Hi Every1,
My car needs a clutch change but not sure which one to put in as last one wasnt and didnt last to long was a blue print one. Ive got options from valeo, blue print or exedy? which ones do you lot recommend and do a lot of motorway miles aswell when working? if you have any better...
cheers m8,
so prise open the cover which holds the tumblers shall i prise it from the back where it was held with the clip and just prise it until the tumblers come out or shall i prise the whole cover? what tool did u use?
p.s the cover do u mean the front bit where key is inserted or...
i cant get the middle core out it moves around with tumblers in is there a way to take it out. the clip has come off etc but tried with key inserted and without but tuff do get out? maybe need to use wd40 or sumthing
hi,
Ive got a k11 micra 1.3 lx just wondering whether it would be safe to use redex into the carb and fuel tank to clean injectors and improve perfomance and fuel eco. ive searched a few threads and sum like sum dont. Would it clean out he carb without getting them ultrasonically cleaned...
ok m8 thanks ill have a try 1 question i have the right lock and the left but will they only work on the side they are meant for as they look the same? what kind of file can i use what did u use?
advise on locks
finnaly got hold of some spare locks so frank need your guidance!
do i take the clip off the back off the lock and when u say tumblers are them the things in the middle in silver coating and do they need filing from the top with key inserted but will this mean only my key...
i can get the blueprint at the same price so just want to know the wich 1 would last longer and be more reliable really but seems luk is popular but i can get the blueprint for kind of same price.
The reason why i wrote last two posts is to get peoples views and whats the best and cheap places to get products from and give views especially if people are doing the same things like service car.
for a nissan 1.3 micra what do peopel use for oil and what watts i searched so far its...
which 1 would u lot recommend for a nissan micra k11 1.3lx
blueprint clutch or an luk clutch there is only a few quid difference but is there any difference in them too? also any others u would recommend for max 55 quid tops.
north west m8, fitting im getting under 50 quid so its ok i might go 4 a blueprint clutch for 50 quid baring in mind its an 1.3 so want a gud quality 1 and dnt want a crap 1 and do the job again as it should last now.
ps could wait but its too much stress on the engine especially uphills...
i think i know what it is after going to a few garages it is the clutch when im going up hill etc as dew stated above it gives off high revsso need new clutch not throttle as i did solder that a few times and so no difference so its clutch for me.
any ideas where to get cheap clutches from...
yes thats exatly what happens revs up then down but gear does not slip, i doubt it myself if its the clutch but im gonna take it to a few more garages but so for throttle issue is the main problem i think but ill get reassurance from a few more if so ill try getting a second hand throttle as ive...
ok, so ill try franks option first as could save money and keep same key. so i need to go to scrap yard and get a barrel from another micra what kind of money shall i give i know its cheap maybe few quid if possible or free!
with this small barrel just follow your instructions. ill let u know...