my micra is chonging black smoke out the exhaust! I thinkin it is valve stem seals but usually burning oil smokes blue and not black anybody know what it is?
i could have, i dont remember coming across one. ill check that!
---------- Post added at 15:00 ---------- Previous post was at 14:54 ----------
ive just checked and it was pressed in the bottom. put it back on and its worked, idling perfect!.
cheers mate!
how doo peeps.
i upgraded some of my vacuum hoses to red silicone. it looks nice but i had to take off the big sensor thing off the front of the throttle body (the one with the brown connector) to get to the feed that goes to the fpr, i put it back on again. but after i did all this my car will...
well i was thinking of about 5psi or there abouts. and iveheard that hot wire maf sensors burn out under boost
im best off with a remap really tho arent i. and how do i uprade the maf sensor as its in the throttle body.
so im not getting an accurate reading because its a narrowbwnd lambda but it seems to do the job from starting the engine from cold and lightly pressing the throttle.
from starting it, it revs at about 1400rpm with a stoichiometric ratio and as the choke wears off and the revs drop to idle...
im moving soon to somewhere with a garage so thinking of turboing it, any suggestions or tips you cud give me.
dont know about the wideband its the standard one. they go to closed loop when you boot it
cheers mate.
well i have an air fuel guage and its reading really lean on idle so i thought i mite of sorted it out,
are the emanages any good?
thanks ash.
hi there.
just wondering if i put ga16 throttle body and injectors on my cg13 what wud i need to run it? would my cg13 ecu run it or would i have to get a ga16 one?