Recent content by lawina

this is my little guide on fitting super s spoiler... it's in polish, but there are many photos so i think that you'll see my ideas... http://www.nissanklub.pl/forum/viewtopic.php?t=7233

you don't need to cut anything out... the mirror glass is glued to the plastic that holds it... you just have to heat it up using for example hair dryer and gently take the glass out... stick this heating mat to it and put everything back together. the electric is even easier... one wire you can...

I bought Artec 13" alloys couple weeks ago... I was searching for 14"... but these were a real bargain... and they look also nice :) The alloy is pretty much dirty on the pic, but thats the only pic that i've got... Today we have Nissan Club Poland meeting, so the car will be shining ;) I'll...

could someone tell me if that is k10 micra's front anti roll bar? If it is... where do I install it? does someone have any photos of k10's front arb actually installed on the car?

i'm afraid 175/70 are too big, and they will be rubbing... 175 is ok... but the tire profile is too big... when buying 175 tyres on 13" wheels you should look around for profile like 60... 175/60/13 would be great... in these tyres profile has 105mm, but in 175/70/13 the profile is 122,5mm ...

I have in my micra exhoust pretty similar to the the one on the 3rd pic... here is how it looks: It's not fitted as good as I would want it to be, but still looks nice... and also sounds nice :D

I just want to tell you all, that couple days ago I was installing the digital clock... I took both seats out, raised the carpet... and there was no cable for the clock :( I had to search for the right cables couple of minutes, and finally i used the fabric radio loom... everything works...

ILL - it's the illumination of the dials... dont bother with ign and chg couse you DONT CHANGE ANY CABLES in this plug!!! (except of the wire to the coil)

does the rev counter react in any way when you rev the engine? or does it only reacts when you use indicator? please tell me is the other stuff working? (temp, fuel, etc.)... I'm in school now, but when i'll be back home i'll post a picture of where to connect the cable to the coil... because...

does the rev counter react in any way when you rev the engine? or does it only reacts when you use indicator? please tell me is the other stuff working? (temp, fuel, etc.)... I'm in school now, but when i'll be back home i'll post a picture of where to connect the cable to the coil... because...

that's just what i did... I haven't really seen any L K10's in Poland.... only LX's... anyway as you said "chopping and splicing" took smth about 2 minutes... not a lot of time and work... i think less than removing a plug from other car...

I have done this not so long ago... I have made a diagram for you, so i think although my english is not so good installing SuperS dials will be understandable and easy ;) but first... some explanations... 1. I dont have LS but LX K10.. but i dont think that there is a difference in dials...

160kmh... that's the end of the scale in my micra...

are you saying that i am wrong with the solution?

You have to connect the rev counter to the coil, as it is connected on the following picture (to the white cable with a red stripe)... remember that if you are using the whole gauges (i dont know if that is the right word) from the SuperS you have to connect the rev counter thru the 2.2kOhm...