Recent content by CMF_niilo

  1. C

    Micra jerky at low speeds

    Hi Richard. Am on with same issue - K11 -93 model. Changed fuel-pump & regulator, but that issue still sometimes shut off engine on traffic lights. But the "jerkiness" which existed before has almost gone after above replacements. Going to replace throttle-body from my crashed spare-Micra on...
  2. C

    Fuel pump long run when power on w/o start

    Ok. As my experiences are from -93, -94 and -00 models, they seen to handle fuel-pump differently. In this oldest model heard this 5sec. run, but not on the others. That made me think about issue on that. I suspected failure in old pump because it sometimes run on start that 5sec. and...
  3. C

    Fuel pump long run when power on w/o start

    Thanks frank2. Need to clarify that pump was run that about 5sec. even w/o tryin to start engine - only ignition turned on. Referring to another micra about same age which do not run pump even on every start - which I assume means the fuel-line keeps it's pressure between starts. So do you...
  4. C

    Fuel pump long run when power on w/o start

    Had replaced fuel pump & fuel regulator, but still, fuel pump runs long every time I turn ignition key on (w/o start so that I can hear it). As my experience is, normally in K11 this not happen usually, which means that the fuel pressure in fuel line is not staying. So the questions are : 1.)...
  5. C

    Error Code P0171...does anyone know what it relates to?

    For the error code "System too lean..." Proposing this solution : My investigation with 1.4 2000 -model was started after Engine Light started. 1st it said something like catalytic converter is weak ... So thought that the 2nd Oxygen sensor might went off and replaced it with the cheapest one...
  6. C

    Instrument panel,LCD clock & odometer blank

    Hi. Just want to notice the problem and share the solution for it in 1.4L CGA3DE, year 2000 MICRA. LCD meter was partially and after a while total blank. Break it out instrument panel until printer circuit board was under my face. There is 4 flat,metal arms, which came through printed circuit...
  7. C

    Fuel Pump Relay problem ????

    Bought and installed new pump and that fixed problem.
  8. C

    correct injector replacements

    Back in business since long time reading this. Fine you found solution. Since lot of job done with 1.3L engine, my daughter crashed that car. Now fixing CGA3DE K11-20000 Micra,which has no injector problems yet.
  9. C

    Distance & trip (LCD) blank

    Hi. Haven't someone tried to fix this. On very warm this shows OK - normally nothing on LCD -display containing total & trip distances.. Micra K11 -2000 CGA3DE (1.4)
  10. C

    Fuel Pump Relay problem ????

    Can somebody confirm the relay location ? Tried find it on yesterday from 1995 K11, and had no luck. From the picture seen, the location is really strange .....
  11. C

    Micra K11 headlight adjustment motor

    Having trouble with it cause the left adjuster have motor totally jammed. Those "ICHIKOH" branded used-parts are hard to find ( with 6-pin electrical connection). The "VALEO" parts don't fit. Does anyone had luck on finding either an used-part or replacing the motor inside adjuster. That motor...
  12. C

    correct injector replacements

    Ok thanks "baguette" for this clarification. Had thought what's that additional number. No received full set of #5 with the connecting pipe-rail and changed them. Micra is working perfect now. Don't think it's too lazy if those "5" give less fuel. You might be right, mixing those different...
  13. C

    correct injector replacements

    Ok. Try to order them today and change them all. You might be true, they are same. Still thinkin about that additional number, which seen to be stamped later compared to other numbers. My assumption is, it's the production/test-set which been marked to track the units in the case, some failure...
  14. C

    correct injector replacements

    Hi. Having one of CG13DE injectors broken. Checked that using resistance meter. Correct ones give 11 OHMS as the broken one give nothing, which means the coil has cut down. Injectors were stamped as "A46-H02 (4)". The question is : What means the additional number "4" on there. Can get full...
Back
Top