Recent content by CMF_murtle

Would the cold start fast idle be worked from the Coolant temperature sensor? Does yours idle cold at ok speeds with the double sensors? I've been wondering about the lambda voltmeter test. Is this just testing the point that the voltage starts to fluctuate between 0-1 v. Are you saying that...

How do you know when it becomes off the coldstart enrichment, and closed looping? I know how to check the fault codes and check the lambda through this. Can I take it that the engine will be running closed loop once lambda starts to work? Or is there another way to check the change of loop...

Just wondering if anyone has tried to bypass it? Would it work if I put a 300 ohms resistor across the wires, so it fools the ECU into thinking that the engine is always hot. How bad would the engine run when cold.? I've already done the 15K resistor mod, and found this really successful. Been...

update -all sorted now. What are the odds? 2 sets of injectors that had stuck needles/valves. Compressed air in the nozzle end and tapping until they started to hiss fixed it.

update - looks like I've had 2 sets of injectors with stuck needles/valves. Compressed air in the nozzle end and tapping until they opened fixed the problem.

Not sure if you are still around. I've posted a new topic and noticed this one. I've a 1996 with CG10 engine, and just tried to swap injectors with identical looking ones with the number A46-H02. My existing ones had a deeper 4 stamped at the end of the top number. The replacement ones have...

Hi, I have a 1996 Nissan K11 with the CG10 engine. I had some hot start issues with it flooding, and when I pulled the fuel rail off and turned the ignition on, one of the injectors were dripping. I got another complete rail and injectors from the wreckers from a known good engine, and swapped...