Recent content by CMF_mo386

good luck

hello-did you checked the switch on the break padell when you press the break there is a switch there you might need to check it oh-but the box break in the mid is working that means the switch is working but there is no light it could be the fuse or there is some loose wire,,

I did get it down between 677 to 700 RPM that when the fan is on which when the Temp reach 97C by adjesting the TP senser and the black hex plastic screw

hello I had some experiance with the idel speed - if you start the car it should start havy arround 1400-1500 RPM-after about when it reach the temp 70-80 C it should drop to 850-800 when the fan start (Temp 97 C) mine I get it down to 677-700 if it does not drop there is some problem in th TB...

hello-yes my friend I did it was disconnecting for 2 days-I have a strong feeling now it is the immobliser and when I did get the code 143 it is said 143 Immobiliser function in ECU (no/incorrect signal)...

I did change the fuse box all togather(the one of the injecters fuse holder was broken-and the LH light fuse was melted) and still the EMLight is in disco mode-first when I start the engine I put the swithch on-on position for more than 3 second it will start flashes-then it will not fire the...

hello Frank - wow I had a feeling something is going on funny with the car-I will try to invastegate what is wrong there-thank you

hello-I did take out the injecters fuse while the car is runing - it still runing without the fuse is that normall?

Hello-I did use Nissan data scan ver 1.52 and the EMLight is still flashes-the error code which I'm getting is E3 the car has started this errorwith 3 times witch it will not fire,,there is an options of restting the ECU and it will fire ok, but few turn on -off engine the same thing happen,do I...

Hello All and thank you all I think I had a problem with the TB,1st time I did re soldering it was a bit ok but still not happy with the Idel speed, I took out he Idel valve and clean it and re adjest it with the speed it was kind of ok-but not great,, SO I said to myself I will do the soldering...

hello all I'm triying to adjest the idel speed on the micra K11 96 model but there is no luck-when the engian start it will do more than 1200RPM and when the temp start to rise the idel will drop to 1000 or 950 Max-I did clean the idel valve re soldering the Th Body but there is no luck-when...

http://www.allpinouts.org/index.php/RS232_serial_to_USB_converter_cable_schematic

hello frank is it the Red one with the 10 AMP ? no 1 if I disconnect the engine fan wil not work the 30 AMP fuse (green) is it for the Head light left because 2 is melted the EMLight(Engine Managment Light) is still flashes but the car is driving ok

hello all here is the pic

hello- I have a 1996 micra - it does between now an again have the same problem-I did not fint out how to fix it yet-and it is very strong possibility that the immoblizer pick up ring if something wrong with it will act like this-but I found out if you turn off the engine and pull out the key...