Recent content by CMF_EVLGTI

  1. C

    Auckland Meet and Cruise

    thats a reasonable time for Meremere Dragstip, its not the best. Took a Nissan Pulsar VZR 170ps down the track and it only did 16.5sec 1/4. unfortunately I dont really get any spare time these days with 3 young children and even thought the March is economical with petrol at $1.91/l I am only...
  2. C

    Exhaust without extractors?

    Agree 100% if you have the gearbox out for clutch replacement its a no brainer, get the stock flywheel lightened and balanced with the clutch. I am not convinced a 2" isnt to big unless you have the mods to suit. Was putting out 350+ hp on an SR20det with a 2.5"exhaust and now nearly 600ph and...
  3. C

    Exhaust without extractors?

    A lightened flywheel makes your engine rev more freely,gives better acceleration, it doesnt actually give you anymore HP
  4. C

    Nissan Gtir SR20 steering wheel bolt on??

    It sure does, took the Momo off my GTiR and fitted it to my first March.
  5. C

    Auckland Meet and Cruise

    What was done to the car to get a 17.56 1/4 mile time? Is it 1000cc or 1300? Manual or Auto?
  6. C

    solid engine mounts

    I am using solid Nismo mounts in the GTi and they are fine.
  7. C

    k10 with v6 engine

    when we did the conversion from SR18DE to SR20DET there was no difference in the fuel consumption.
  8. C

    k10 with v6 engine

    Its not hard to get wheel spin in every gear in a fwd fitted with an SR20DET whether its an N14 or a K11, managed 5th gear wheelburnout with a stock SR20DET out of a U13 bluebird 147kw at the flywheel.An SR in a K11 would make the car unbalanced as it is a lot heavier than a CG.You would need to...
  9. C

    Bad Boy

    the second photo show a difference in the colours. good effort though
  10. C

    Factory Bolt-on modifications for the Micra...

    yes, my understanding is that EXA gearbox and the original CVT driveshaft is the right length. yes the V is for Viscous LSD. Mine had the conversion and was the deciding factor in buying it
  11. C

    Factory Bolt-on modifications for the Micra...

    I have the RS5F31V can take a picture of it but it will just look like a gearbox, also have the factory cup & dash tray and tacho
  12. C

    Pics - My $850 micra now on the road with G4 coilovers, centrelines, exhaust etc

    were the headlights for Left Hand Drive or right hand drive, the ones I have seen on Ebay have tended to be for LHD cars and the beam angles are different.
  13. C

    re soldering

    the dry joints can also cause poor fuel economy and an occasional miss.Is there is a mechanic with Nissan Diagnostic software near you?
  14. C

    Installed some new speakers today...

    You can really get needle nose pliers in there. You need a flat bit of metal with a u shape cut out, there is also a proper tool that you can get from Powerbuilt.
  15. C

    EOI my micra

    what did you need to do to fit the GTiR seats? never seen any seats quite like that in any of the GTIR's I have owned
See more
Back
Top