Recent content by CMF_D6045

anyone got a link?

i was planning to have them made in a machine shop..would it be the same? if anyone could help me out on every dimension of the bolts?

for the bc coils for the rear are they seperate from the rear suspension or are they in on piece like in this picture? http://justjap.com/store/product.php?productid=19136&cat=&page=9

anybody here ever try the KCA412 camber bolts from whiteline?

i live in the philippines and there is a yellow speed distributor...has anyone tried them?

anyone out there who could help out?

Has anyone of you tried yellow speed coilovers? Is it a straight bolt on to the k11? http://www.yellow-speed.com/products.php?func=p_detail&p_id=217&pc_parent=11

same way as franks method for his camber? i cut off and smoothened out my guards and pulled the fender out a bit before i had a repaint so just the camber needs work

are both sides accurate in its camber on the rear? i wanted a detailed explanation on how this guy achieved this...detail2 procedure would be decent, don't want to end up buying a whole new back portion

current setup is 15x7 +35 and i want to fit in these below 15x8 +15

This is my current setup

just the top part? i wish someone had a detailed explanation..don't want to snap some parts

thanks mate

@ Philippines :)

since i got no available aftermarket mods available for my k11...will cutting my pan hard rod shorter pull the wheels in giving it a little negative camber on the rear? Going to buy 15x8 +15et for chrismtas.. TIA