Recent content by andy325i

  1. A

    Wanted K11 Distributor (1.0 Litre 16v)

    The car is a 1996 P reg iirc This is for a friend in work, if you have one please email me with a price inc postage to Bristol, unless you are local of course :) My email addy is [email protected] Many thanx Andy
  2. A

    Outer CV Joint/boot

    Thanx bud, much appreciated :)
  3. A

    Outer CV Joint/boot

    Hi guys, how does the outer cv joint come off? Is it a knock off type, or is the circlip that holds it on the shaft? Many thanx Andy
  4. A

    What bolt/nut threads were used on the K11?

    Found out what it is :) Normal M10 thread is M10 x 1.5 mm pitch, Jap scrap is M10 x 1.25 mm :)
  5. A

    What bolt/nut threads were used on the K11?

    Thanx Rob, guess the new metric bolts I got don't fit as the threads are distorted in the pattern front panel Grrr :(
  6. A

    What bolt/nut threads were used on the K11?

    Hi guys, Was it normal metric thread, or a fine thread? Specifically for the front cross member, where the Engine support cross member bolts up to it and the Brackets go into the side? Many thanx Andy
  7. A

    Ultra light clutch?

    Thank you again Frank, I'm sure I have a few Valve springs here, I'll give it a go :) Many thanx Andy
  8. A

    Front Crossmember options

    Thats one option :)
  9. A

    Ultra light clutch?

    I fitted a clutch to the gf's K11, but its ULTRA light, like you only have to breath on it before it starts to loose bite. Its an OEM clutch from Euro Car Parts and is a 1 litre 16v. I appreciate these are tiny clutches, but are they normally this light? Its as if the clutch cable is too...
  10. A

    Front Crossmember options

    Hi guys, what options have people used for replacing the front crossmember (Current one is rusted out) I spoke to a mate who works for Nissan and he said they have jumped from £110 retail for the front panel to £317!!!!! Not normally a fan of pattern panels, but have found this one on ebay...
  11. A

    Clutch Gone!!

    THIS! Heard some major horror stories about them. A decent clutch is about £60 from ECP (Not worth saving £20 if you have to do it again!) Did it on the side of the road. Got to be one of the easiest to do. Andy
  12. A

    K11 1996 wont start

    I properly love you frank! :grinning: Pulled the fuse out, foot to the floor (well hand!) and it fired into life, then died :) Put the fuse back in and it fired up first time :) your a star! I will check out your mod when I get 2 mins :) Many thanx again Andy
  13. A

    K11 1996 wont start

    Interesting :) Do you know what fuse it is for the fuel pump? Is there a thread about the running issues? Many thanx Andy
  14. A

    K11 1996 wont start

    Hi frank, nope? Beeing blonde here how would that help? Incase its flooded?
  15. A

    K11 1996 wont start

    It's a 1.0 litre 16v. It has always started first time every time. Apart from once about 3 months ago, it turned over but just wouldn't fire into life, where I checked everything over (fuel and spark both present) and finally it ran and has been fine since. A couple of days ago it did the...
See more
Back
Top