Recent content by andrew77

Sorry for not being up to date on me own thread, I've finally change dizzy cap, rotor arm and ht leads. All is running well at the minute but with some rain forecast this weekend only time will tell if it's sorted. I'm in the throttle body camp too but we'll see. Just one more thing, my local...

So I changed the fuel filter at the weekend. The car had been fine before the weekend and for a few days after but the problem is back this afternoon ( it's been raining). It started up fine but I could hear something wasn't quite right, if I gently squeeze the accerlator it's fine but give it...

thanks for the heads up and advice, I'll try the fuel filter first. I did keep my old throttle body so I could look into properly soldering it and refitting too. if I'm gonna change the dizzy cap should I fit a new rotor arm too? Can't hurt I guess

hello all, I previously requested some help for various problems which seemed to boil down to the throttle body re soldering issue. I had completely random stalling and loss of power when pressing accelerator. I've tried re soldering to no avail ( but I think Now I just didn't do it correctly)...

yeah im gonna do as stated above. theres a small step by step guide ive found on an oz forum with pics but doesnt mention the actual soldering, do i literally just blob some new solder over the points or where it needs? thanks

its a 99 model. im gonna try this re soldering that i have seen posted on various forums. apparently its quite a common problem solver. cheers

hello all. im having a problem with my micra k11 where it seems that when i push the accelerator it is stopping/reducing the fuel getting to the engine and often stalls. i can often have my foot hard on the accelerator for for several seconds with nothing happening and then suddenly wakes up and...