the slayer gets a facelift..

[CMF_kovert.k11]

had the bits and pieces stashed away for a while, but finally got around to doing the facelift conversion..had to customise the front bar considerably to clear the intercooler and pipework - nothing a dremel and a well sharp stanley knife blade couldn't accomplish.. and grind the tow hook off and bolt on a tow strap. all that's left to do is rewire the headlights and get some pins for the carbon fibre bonnet and the ****'s done! not sure if anyone over here has done this swap or not previously..

 

[CMF_frank2]

lookin good kovert
are the wings/guards actually different ? (apart from the repeater hole shape)

 

[CMF_kovert.k11]

cheers frank! the guards are essentially the same as far as bolting on goes - besides the obvious differences of the repeater and headlight hole shapes, pre & facelift guards are very similar if not the same

 

[CMF_plattsy]

Loving the cf bonnet!

 

[CMF_RBLUV]

Need some seats

 

[CMF_kovert.k11]

RBLUV WROTE:

"Need some seats

lol...nah mate..got OMP grips to go in..just need to drill the mounts and the seat rails

 

[CMF_kovert.k11]

...and the (micra) Lord did say "let there be (head)light"..lololol

 

[CMF_plattsy]

Put the enkies on!

 

[CMF_Seb]

Facelift in Australia? Cool !

 

[CMF_kovert.k11]

cheers Seb..yeah, that's what i thought - can't say i've seen one down here

 

[CMF_Tony]

there's afew in Queensland but there convertibles so first hatch I think?