please transmission help!!!!!

[CMF_nikos]

i'm an owner of a k-11 1.3 witch i race with.
its the greek edition called challenge witch has race headers reprfiled cams and lower suspensions.
i have replace all the suspension with bilstein rallye.also i've replaced the rear axle and fitted a sunny 2.0 one.i've replaced and the injection with a sunny 1.6 and the injectors to.
the point is that i'm trying to do something with the transmission.its way to long.
i think that the transmission of the 1.0 its only 5% shorter.
i want some solutions about the transmission please and sorry about my bad english.
thanks

 

[CMF_nikos]

pic

 

[CMF_nikos]

pic

 

[CMF_nikos]

pic

 

[CMF_nikos]

pic

 

[CMF_nikos]

pic

 

[CMF_nikos]

pic

 

[CMF_frank2]

the facelift 1.0 diff ratio is a lot shorter nikos

 

[CMF_JPK11]

if you could be bothered there was an n2 low ratio gear set on yahoo jp.

 

[CMF_nikos]

how many precent closer is the 1.0 facelift gear ratios?

 

[CMF_frank2]

4.465 diff iirc mate

 

[CMF_nikos]

and the pre facelift 1.3 like mine is??
thanks frank.

 

[CMF_nikos]

i quess 3.8947??
is that right??

 

[CMF_frank2]

The pre facelift 1.0 was 4.050, and the 1.3 was 3.895 according to haynes
The 14" wheel facelift 1.0 had a lower diff

 

[CMF_nikos]

acording what u said its about 13% shorter.
any other way to gain something more than that?

 

[CMF_frank2]

nikos WROTE:

"acording what u said its about 13% shorter.

any other way to gain something more than that?

only a 5:1 straight cut diff from matt humphris mate, i would guess that the GA14 almera diff is the same as k11,s

 

[CMF_nikos]

thanks mate.you where very helpfull.

 

[CMF_frank2]

nikos WROTE:

"thanks mate.you where very helpfull.

no probs nikos
nice looking car you have, the axle swap sounds interesting, and what cams did you go for ?
and matt posted up the number of teeth you have to count on the crownwheel a few years back on MSC, to identify the 4.465 (down the speedo hole iirc)

 

[CMF_nikos]

what about a crownwheel and pinion from other nissan.
i dont really know about the cams.its should be a first stage replofile because the car shold with those modifications from nissan dealer and it was only available in greece.
here is the article from 2002.
the 1.3 k-11 prodused 97hp and the facelift 1.4 101hp
http://www.autotriti.gr/data/magazine/pages/10_2002/01.T10.micra.asp

 

[CMF_frank2]

i think the diff splines are bigger on the RS5F31 (GA16) g/boxes nikos, tho the crownwheel and layshaft may fit ? http://www.genis-x.com/comments.php?id=c4392f
and that 101hp from the CGA3 is what the cube alpha engine had too eh.
maybe they are avanti cams ?

 

[CMF_nikos]

no they are reprofiled under nissan theoharakis greece specifications.
the shop that made them is this.http://boubiscams.gr/