bumper

[nudger]

micra k11 face lift,going to try to take front bumper off,how many nuts and bolts hold it on and if possible what are sizes are they,i seem to have a 3/4 gap under drivers head lamp plus i want look at the cross member,any thoughts will appreciated,from an old codger,cheers.

 

[davyboy]

From memory there are about ten bolts holding it on, probably 10mm as nearly always used on Micras.
The gap may be the leg end fittings have been bent in a small knock at some stage.
Use the search function nudger, andy5077 put up a thread a while back with pictures on the bumper removal.

 

[LiamC]

A few 10 mm as davy said, and 3 12mm each side where the bumper brackets are held onto the chassis legs. The small bolts onto the wing are the most awkward to get at, next to no access

 

[nudger]

A few 10 mm as davy said, and 3 12mm each side where the bumper brackets are held onto the chassis legs. The small bolts onto the wing are the most awkward to get at, next to no access

very many thanks to all very helpful will proceed with care cheers.