Search results

even with alternstor off it still is doing the same thats what is leading me to the ecu could there be a fault could it have got wet / ??

cuts off all power stops every thing so no power is getting to any thing

thanks i will try that... i meant to mention . we have a power kill switch on the car .. when the car is getting too hot IT WONT work when the car is COOL it will work could this be an ecu problem..

we have a gti golf fuel pump on it.. because we dont run a standard petrol tank.. and we cant use the standard pump.. do you know what psi pressure it takes to run a 1L micra. many thanks

i race a 1994 k11 nissn micra.. we only use 1st and 2nd gear.. the car was running 100% a few weeks ago.. i took it out last weekend the car was loosing serious power.. we replaced the alternator , throttle body , spark plugs, + leads ,distributor.. and its got worse i need help asap as my next...

i was thinking could the problem be caused by the e.c.u .. could it be faulty.

thanks guys il try those tomorrow and let you`s know if it has sorted our problem or not many thanks jonny

i race a nissan micra we only use 1st and 2nd gear so the car does get warm ... today the car kept loosing power ... does any one know what could be wrong.

hi guys. any one know how I can get that few extra B.H.P out of my 1.0 k11 .. that wouldn't be noticeable

okay guys i have a new master cylinder and servo in the pipe that runs from the cylinder to the inlet manifold when i pump the pedal air is pushing out thru the carb ny sugestions on what this is .... also i have got the brakes working but only when you give the pedal 3 or 4 pumps and about 10...

i will try that tomorrow much appreciated thanks alot

the micra runs from 1992 until 2000 i got told the master cylinder is the same and they look identical.. we bled the brakes tonite but still the pedal is straight to the floor the car has to be ready to go in 10 days and we are just baffled on what could be causing this. many thanks jonny

could it be the O ring on the master cylinder that is the problem /??????

feels heavy some times but mostly it is going straight to the floor

okay guys i need help my 1L micra brakes just wont work ive put a new master cylinder in it 2 new back brake cylinders ive bled the brakes numerous times but air keeps getting into them and always no brakes front or back can any one help.

ANY ONE GOT A SERVO FOR SALE FOR A K11 MICRA 1992 - 2000 Thanks

we done all of this pistons have been cleaned re lubed sliders sanded and lubed with copper grease but still sticking it seems just to be the drivers side now.

hi my front breaks are sticking on my micra the callipers have been dismantled cleaned re sealed and put back on new break hoses and the breaks are still sticking any one know does the master cylinder give bother on them ??