Search results

Thanks for the help guys. Problem seems to be solved, got a ma10 carb from the scrapyard fitted and is the car is doing fine again. Cheers

Thanks for the replies guys! The distributor and the points have been cleaned only a few weeks ago, and that didn't help. Changed the plugs this morning, went ok for about 20 miles and then started stuttering again. So I'll go and check the vacuumpipes as soon as I get the chance. Again...

Hello guys, I've got a problem and I hope someone can help me, my 1.2 super s has developed quite a heavy stutter when using partial throttle. Somethimes it can be so bad, that when pulling away from standstill the car will just stall as soon as I lift the clutch a little, resulting in pulling...

can anybody post a picture of a k10 engine with the ecc on it? I have a super s with an ecu under the seat but the carb doesn't look special or anything and I can't find anything on the carb that shouldn't be on any other carb. please help!

first of all, sorry to sammoHung, I didn't know about the ecu. As far as I know I don't have the ecc stuff on my k10. there is nothing under the passengerseat, and the carb looks pretty standard to me. But I still don't have an answer now. Ed says it makes no difference. en Bob says it's a lot...

this is not about an ecu, this is about ecc, some stuff that seems to be fitted to some k10's and it gives you some extra work when you replace the carb for a weber one.

I've got a 1.2 super s. it's from 1991. I'm from holland so we don't have k reg here. How can I tell if the ecc stuff is fitted on my k10?

and does this fit on the standard inlet manifold? The inlet manifold on the picture doesn't look very standard to me. how much hp are we talking about here? and is it noticeable at high or low revs? Thanks for the quick reply btw

Hi there, I have a question about fitting a weber carb on a micra. Some of the guys here have fitted one, but what are the other changes you made to the engine? Is there a significant difference if you just change the carb, without changing manifold (in of outlet), cams etc? Nampus