Search results

Sorry meant to add if someone lets me know where and how to upload I will

Yes I have workshop cd got via eBay

Some of these experienced timing chain problems which stretched ( Renault) You have to remove sump on these which is a pain because gear box stops it removing !! Therefore need to move lossen gearbox to improve access.

Thanks I meant to post on this but you are correct it was loose connection at sensor!! Was annoyed garage didnt notice ?

When finished don’t forget to adjust clutch (knurled nut on clutch cable) then relax!

Hi have done several of these two of my families and my own a few years back Allow a day agree with Tony can be hard to get back on but if 2 pairs of hands just for putting gearbox on (did it on own after first time Replace release bearing why gearbox is off) it’s basically in Haynes manual but...

Before you remove speed sensor check battery isn’t on way out can cause fluctuations If ok remove sensor held by 10mm screw/bolt You may need to slightly twist sensor to remove it Disconnect plug now Check speedo by using a multimeter set at ac across two terminals in Block if you turn speedo...

so you have to look in forums Menu for “radio code” section ? I see ( hope I haven’t upset anyone)

I did say “if stuck” ice cream would have melted by now ?

You can check sensor with multimeter will try and post instructions if I remember this version sensor is connected to ecu then from ecu to instrument

No problem sometimes you can get people send for free but for £0.99 done in 2hrs Less hassle

Have you tried clearing sensor? Sometimes pick up debris/dirt

Sorry You did obd test so assume no engine light

Sorry about that true facelift has speed sensor are any error codes showing (engine management light on?)

There are videos on this for topping gearbox oil up

This is not electric it is steel sleeved connected at rear of gearbox reached from above

Hi eBay 0.99 p if stuck

Have a look in engine bay by battery front left when facing car you will see black box of relays and fuses sometimes there is a poor connection from cables going in to box ( could have been disturbed when changing battery)

Hi Have a problem with Micra c+c 1.6 sr New clutch fitted by garage now shows error Po335 fitted new crank sensor checked wiring Only problem engine has to have 3 attempts before it fires runs ok then rpm ok etc Garage suggestions is stretched timing chain but why has this only happened after...