Search results

Anyone got black headlights for sale like the pic above?

guys, anyone has extra headlights? I prefer the black one or the crystal one..buying for £15 for the pair..ship to philippines via the cheapest shipping method

Is bcm equal to canbus? Does it need to be reprogrammed if i got it from another car? My car doesnt have immo. And my throttle is going crazy. It offs after check engline light is on. Scanner wont connect to ecu

I bought an impul ecu for cr12 though..havent tried it fully yet since the ipdm that i bought is faulty.

What color is your k12 bro? Color code? Tnx bro

Wat kind of ecu did u replaced? Same number? Or reprogrammed?

Sorry i forgot to mention that i bought an ecu from europe and the ecu came from a micra with immo however mine dont have an immo so what i did, i went to an electrician and he transferred the smd chip of my old ecu to the ecu with immo. It started however there was power issues so, i bought...

hi, same issue with me but i already replaced ecu but still the problem is there. at first start when CEL is OFF, it revs good but after 2-3 seconds, CEL is ON, no response from throttle even pedal is on the floor.

hi guys, i had a problem with my micra k12. First i was checking on the ground terminals since i had a u1000 and u1001 fault. i removed, cleaned and reinstalled all ground terminals back. i also checked blown fuses. when i finished everything, i tried to start my car. No crank, when i turn the...

guys can i use 1.4 ecu? my engine is 1.2..what change will it do if i use 1.4 ecu?

Fuel injector too lean bank 1

anyone has it? Cant find it anywhere

What version of elm do u have? I have mine which is v2.1 that connects..however if u want to use nissan data scan 2, use elm327 v1.5

So nuts about nats men..my car is a non nats but the ecu that i bought came from a nats micra..

i just bought a used ecu to replace my damaged ecu..obd2 scanner says immobiliser problem then upon inspection, my car has no immobiliser on ignition barrel (the black siemens thing). Cant start it..cant code it since no immo code..im on dead end now please help. Thanks!

Is it possible to remove the original eeprom chip then transferred to the new ecu so that immobiliser wont prevent my car from starting?

Swapped ecu, immobilised, and trying to program the key. Now i need the pin..anyone have it?

Did you replace the ecu or same ecu? Coz i had replaced new ecu and had immobiliser fault and wont start just cranks

Have you solved this? Im also facing this problem now

Same problem with mine..im thinking about the fuel lines..maybe add lacquer thinner..havent tried it yet