Search results

Sorry mate, i did look, but the ones i tried siad i couldnt post there. anyway, have it sorted now, only took 13 mins to remove and replace. Cheers.

a clutch cable for a K11 1.3 93-98 pref in the essex area close to Grays im quite desperate for one, and really could do with it tonight as the missus needs the car for work tomorrow. i was going to post this in the buy/sell forum, but it would allow me to post there :( Cheers for any replies.

on the K11 you have 2 trailing arms each side that go to the top and bottom of the rear axle, is there any kits avail for these arm, as mine are quite worn and allow the axle to move and rock, if you put on the handbrake and rock the car back and forth the axle rolls back and forth too, im sure...

you will need an arial adapter if you still have the standard nissan headunit, i had to get one for the missus car.

http://cgi.ebay.co.uk/JVC-PIONEER-Stereo-Removal-Keys-Radio-Tools-FREE-P-P_W0QQitemZ9702454066QQcategoryZ39759QQrdZ1QQcmdZViewItem they not that expensive, i need mine for my own stereo. and yes thats what i was saying, the iso plug fits straight into the back of the stereo, (should do) :D

i got a JVC in both my cars, and they both have a standard ISO connector on the headunit. plug the JVC loom into the headunit, the other end plugs into the new ISO lead you got, then plug that into your nissan stereo connector, and should be fine. **edit** i just saw the head unit has no leads...

id agree with the second post bout checking the connections to the back of the bulbs on the headlights, the heat may have melted the dim and main terminals together, i just had my lights out and the drivers side one was mented onto the back of the bulb fitment. if thoses terminals are joined...

sounds more like the primary shaft in the gearbox to me, i think micras suffer with gearbox probs (alot of guys will know more about that, not had micra for long) i think the bearing spins all the time anyway, just without pressure on it, but if it was bearing i would expect it to be more noisey...

dosnt sound like CV joints to me, when CVs are out they knock on full lock when accelerating/moving off. sounds to me you might want to look at pads, and poss disks again, did you bed them in properly, they have to be run in with light braking for the first so many miles, it tells you this in...

i had this prob also, and as the second reply said, it could be the throttle body, there are solder joint inside that you can re-solder, worked a treat on mine...

that link sonic only list the ABS 1000cc one, no good for the 1300cc or the non ABS 1000cc

same as mine then, you want the bottom one on the 1300 one OJ-0142 with delivery and carrage it works out 41 quid.

how much you looking at paying, the outer CVs are not that expensive. you havnt said what size engine you have 1000 or 1300, there are 4 types for the K11 1000cc (top one is the ABS, bottom one is without) http://www.partsinabox.co.uk/acatalog/Online_Catalogue_Micra_1000_Mar_1993_On_1361.html...

http://bap.dominohosting.biz/bap/bapdb01.nsf/$$ViewTemplate%20for%20MakeModel!OpenForm&RestrictToCategory=NISSAN%20MICRA%20K11%20(01/93%3E4/98) Lower Front Crossmember (but it works out £32 inc VAT and Delivery) the place i got mine from does does there own Local delivery and they are in...

After the missus had a fight with a width resriction the other day, i need these parts, pref local to Grays Essex, plz reply if you can help. i need for a K11 93-96 model :- Bonnet Front Bumper Front Slam Panel Stabiliser Bar For The Bonnet Catch to Crossmember 2 Steel Wheels Engine...

Im in the middle of replacing the crossmemeber on the missus car, she hit a bollard, but TBH it was lucky really that it was rusted through, coz the rust gave way before it twisted any bodywork. new one cost me £18.21 from my local panel place :D

ahhh i see now, the facelift ones dont have a grill, the bonnet comes down to the bumper with the grill bit in the bonnet. Cheers m8, and you website has mucho useful stuff on it.

as some of you know im looking at getting a few bits to rebuild the front of my missus car, i have seen a front grill that i need, but its for the later facelift model of the K11, will this also fit my early K11 prefacelift. cheers for any advice, the later one does look nicer :D

shes fine, we spent 5 hrs down the hospital bout it, they put it down to low blood pressure due to pregnancy, shes not allowed to drive till after the birth. i got a lower crossmember today delivered COD from maldon auto panels, cost me a total of £18.21, welding it on is not a problem, i...