Search results

  1. D

    K11 March heater problem

    My 94 march heater wont work on the 1st 2nd or 3rd setting. Only when i turn it up to number 4 it works at full power. Any ideas
  2. D

    Fuel additive for k11

    Just wondering is it ok to use dipatane fuel treatment in my 94 k11 nissan march.
  3. D

    94 nissan march colour code

    Found it. Thanks alot for the help
  4. D

    94 nissan march colour code

    just wondering if anyone can help me find the colour code on my 94 march. I know its on the door or under the bonnet but what does the number look like. Thanks
  5. D

    Ebay find

    Ye looks like its had a knock to the front. Take the bit of rust to mind aswel before buying. Could be worse than it looks in the pics
  6. D

    k11 temp gauge not going up

    I already tested the thermostat and it works fine and the gauge needle somtimes goes to normal then back down to the bottom. Probly a loose connection. Were is the temp gauge sender locatated. I know wat it looks like but jus cant find it.
  7. D

    k11 temp gauge not going up

    my k11 micra temp gauge wont heat up to half way were it supposed to be. I was thinking the thermostate was stuck but if i drop a gear and floor it it sumtimes shoots up to half way then goes back down within a few mins of driving. any advice before i change my thermostate
  8. D

    inserting drive shaft into gearbox

    thanks for the help. Goona give it a bash in the morning. let you's know how it goes
  9. D

    inserting drive shaft into gearbox

    thanks alot but i'm in ireland. can i buy one from a motor factors.
  10. D

    inserting drive shaft into gearbox

    my circlip is wrecked. can i buy a new one or do i need to buy the whole kit. and do i squeeze it smaller and then put it shaft or squeeze it when its on the shaft with a circlip pliers.
  11. D

    inserting drive shaft into gearbox

    thanks for the help. my circlip is bent so i took it off and the shaft slid into postion perfect. do i need to close the circlip as i install it.
  12. D

    inserting drive shaft into gearbox

    if it has slipped what does that mean. also can i buy a new clip or do i have to buy a whole new joint
  13. D

    inserting drive shaft into gearbox

    ha . Do i need to keep it out of gear wen i insert it.
  14. D

    inserting drive shaft into gearbox

    i already gave it a smake of a hammer and bent the circlip. Is the a groove or something that it has to sit in to
  15. D

    inserting drive shaft into gearbox

    i done my cv boot on the passenger side of my micra. I removed the drive shaft to make it a little bit handier to do. i have a problem trying to insert the shaft into the box. how do i align the circlip so it slots in. thanks
Back
Top