you'll only see the rear of the car ;). But i know im not too keen fiberglass bonnet cannot come soon enough. Few more mods to do to bonnet before that.
Thanks, It's a viscous type running in an oil/greases bath top hat but currently grease packed might change to oil for better lubrication. It's out of a mx5 mk1 eunos 1.6
The 99p rear beam lol? Cheers, nice to get it nearly finished will get some pics up soon. Just waitin on driveshafts comming back also need to sort out a fuel gauge, and then the cage and some bumpers. Mot next week :)
been away for a week but had a good week and weekend after on the car, shes nearly finished now
finished and painted the cradle
piped up
bonnet vent to be made
chain tensioner
shafts cut ready to be machined and welded
made exhaust...
Cheers, wanted to shape in the main square plates but got carried away and cannot get to them with the grinder.... maybe get them cut with oxy acetylene
Got the engine/diff cradle pretty much made up just a few odd bits to fully weld and a few more bars to add.
Fiberglass bumper will be made once the car is finished also bonnet scoop will be made then i think a mould took of that to do a bonnet aswell as the air...
Well heres a few more pics of making the engine/diff cradle. Steady progress as it all needs making and lining engine to sprocket etc.Mock up of where i'd of liked them to sit.
Few more nights should see engine in by itself.
Exhaust may need moding a bit and also front bumper will see a...
no decent pictures unfortunately. Will get some more on in next few days.
got both front calipers rebuilt waiting on shims/anti rattle plate thingys. Thanks to skinner_87.
Primered ready for paint, 1mm spacers made and fitted.
redid rear brakes with ebc pads, going to try it as it is with...
Cheers, got some ordered. Link didn't work properly but i found them from it. :) Cheers was on my list to ring Nissan up but saw your post earlier. Thanks
No probs. yes 1mm between caliper and upright to bring the caliper out 1mm to centralise it on the disc.
I also need the retaining clips or at least one. If I find some I'll let you know or if you do I you can let me know. :)
micra centerbore is 59.1mm and pulsar gtir disk centerbore is 61mm acording to the net. I heared you use 1mm rings so i made some from sheet metal. Worked a treat might check with a DTI just to check there running true up and down. Also you need a 1mm spacing between caliper and upright, going...