Recent content by r3aktor.mk

tnx

What purpose it has? Do I need to solder it back, or I can live withouth it?

Also the hoses under the rear seat, mine was rotted and leaked

Do you know what is this cable from? Its not fron the reverse light, its on the transmission and goess somewhere in the wiring loom, the wire snapped. Some kind of sensor maybe? http://imgbox.com/PANo52JQ

Unfortunatly not. It was 11pm and started to snow. Yay

Yes

I think i cant pull the fork towards me more than it is now. I tested how the new bearing was sliding before the install, the clips, it was going smooth. The axle had a little grooves, i sanded them with 1000 grid paper, and i wonder why they didnt put a sleeve, so the bearing is not sliding...

The spring from the fork is pushing it back, i took the cable and thighten it at that spot,if i tight it more the cluch is disengaging.

Yes, i loosen it to the point that cable could fall of from the fork, then i thithend it exactly so the cable is not pulling the fork

Dont tell me the clutch is gone :eek:

Its loosen to the max allready :)

HEllo, I changed the throwout bearing as you can see on the pictures Now i have a grinding/hissing noise like metal on metal when accelerating. Its proportional with the amount i push the throttle pedal. Its in all gears, any speed, any rpm, warm or cold. My friend tightened...

I cant look for a 1.6 flywheel, Nissans are rare here, so i ask if only the whole kit is a straight fit?

Well, this confuses me Nipparts Clutch Kit Nissan MICRA (K11) 1.3 i 16V 92-03 Description: 3Pc Clutch Kit With Bearing Diameter [Mm]: 180 Diameter 1 [Mm]: 180 Diameter 2 [Mm]: 180 Extra Information: Kit 3 Pieces (Cover & Plate & Bearing) Hub Profile...

My clutch is gone, its stuck in neutral(lucky me), there is a grinding noise when i press the pedal, when the engine is off, i can shift any gear except reverse. When its on, i cant shift at all. I have to wait for 2 weeks for clutch kit to arrive AISIN - 200euros or VALEO- 70euros. There...