Recent content by mahesket

Anyone?

I get your point, I think I will have to, unless I can borrow one from the workshop over the weekend. Cheers Matt

Lubed them up and also went for some shock unlock. Which has worked in everything else no issues. They started couple of turns them that feeling when you know they are going to shear. May have to drill and tap maybe stud extract if I can't find a cheap cat. Any tips for the lambda sensor I...

As the title. Half way through replacing my manifold and all the bolts have sheared off in the cat so could do with a replacement. Also I can't get the lambda sensor out the old mani so if anyone has one of those too Cheers Matt

Fixed my headlights so both now work.....took a while changing h4 connectors and opening up the switch but got it done in the end Then set about taking my steering wheel off but I hit a snag with not having a big enough torx bit. Anyone know what size is required?

As the title really, what size torx bit to remove the airbag from my k11 so I can remove the wheel. Also while I'm here what size is the nut which holds it on? Cheers Matt

I will search for some m8 studs on eBay and give nissan a call to see how much. Cheers guys.

Anyone know where to get some from?

Small update, today I received a new exhaust manifold for the micra, when we have moved house in a couple of weeks i will get back on with getting this thing MOT'd might just need a few more bit of exhaust, tyres and weld up the sills.

122 on the clocks????? Might be just over a ton, maybe? Is your wheel/tyre combo different to standard overall diameter?

In what way doesn't it fit your mountney?

Any ideas?

Hey everyone, can't find the answer to this anywhere, what size is the spline on a 1995 K11 Micra non pas? I have a momo steering wheel from my old MX5 which I would like to fit and I have seen a boss on eBay for £8 which says fits all models (heard it before) and the splines are 15.5mm. Will...

Yeah it was running for longer than that! i may have to disconnect the battery for a while to reset the ECU to see if that works? Actually i should check the fan works first lol

Right first problems tackled this morning. The brake warning light was on so I checked and adjusted the handbrake and cleaned the switch, this didn't cure it so I bled the brakes through with ATE super blue racing fluid (all I had to hand) and it's cured the problem. So then I moved on to...