Hello needed some advice and help with k12 blower motor how can I access this heaters not working only works a little when tapped on around that area and that too noisily I'm frozen in the car having to drive 8 hours a day doing deliveries I'm not that savvy and help would be greatly appreciated...
Hello needed some advice and help with k12 Manual. how can I access blower motor fans not working only works a little when tapped on around that area and that too noisily I'm frozen in the car having to drive 8 hours a day doing deliveries I'm not that savvy and help would be greatly appreciated...
Thanks for the reply but still not managed to understand fully how to check the sensor.Like today have been driving it about 6 hours and it's been fine if it was a bad sensor would it be ok sometimes and sometimes not.Also having problems with heater blower motor like its jamming and stopping...
Unplug the back sensor and check the actual sensor connector with a multimeter? Plugged and unplugged how would I check it plugged sorry I'm not that savvy thanks
Update changed spark plugs and gave the car a full service but still same issue with EML coming back on after a few miles rough idle and hesitation on pick up with OBD2 on it reads sometimes both sensors 1.275v and sometimes both are within range under 1v and sometimes the post cat sensor is...
Update changed spark plugs and gave the car a full service but still same issue with EML coming back on after a few miles rough idle and hesitation on pick up with OBD2 on it reads sometimes both sensors 1.275v and sometimes both are within range under 1v and sometimes the post cat sensor is...